H3 fourth Tow Loop (Full Version)

Hummer >> Hummer Lineup >> Hummer H3

H3 fourth Tow Loop

  

Tinseast -> H3 fourth Tow Loop (5/31/2007 12:19:56 PM)

Took some modification, but finally evened out the rear end by adding a fourth Tow Loop.  Fully functional.  Relocated the license plate to just above the hitch. What do you think?

[image]local://upfiles/1080/47405EFEDA5B4F6F94E64B1A93091892.jpg[/image]

  
crank -> RE: H3 fourth Tow Loop (5/31/2007 12:45:04 PM)

I LIKE IT!!!
Was it much of a job converting it?
Great Job![;)]

novasaigo -> RE: H3 fourth Tow Loop (5/31/2007 1:14:15 PM)

So does the towhook light up at night?

[&:]




Dennis -> RE: H3 fourth Tow Loop (5/31/2007 1:23:47 PM)

Looks pretty niffty...good job!

jbnjc123 -> RE: H3 fourth Tow Loop (5/31/2007 2:30:09 PM)

Looks good, should have been there from the factory anyways. 

blackstangs281 -> RE: H3 fourth Tow Loop (5/31/2007 4:03:55 PM)

That is cool.................I like it[:)]

Golden Shellback -> RE: H3 fourth Tow Loop (5/31/2007 4:13:32 PM)

More details please, I wanna know how did you do it. thanks

H34 pleasure -> RE: H3 fourth Tow Loop (5/31/2007 5:01:32 PM)

looks nice..I like it..good job.

tarheel_34 -> RE: H3 fourth Tow Loop (5/31/2007 6:32:13 PM)

What part of WV are you from? Nice to see another 'eer on here...

TINKED -> RE: H3 fourth Tow Loop (5/31/2007 8:28:59 PM)

Looks Great I am going to look into modifying mine now.........no more crunching the license plate....I also thought about getting the bracket like h2 have on the spare tire for the license plate.....I like your idea ! Now if we could figure out what to do with the front one...LOL

[image]local://upfiles/2323/1E87E735743E450EAD5B2DBAE38D7182.jpg[/image]

Crash -> RE: H3 fourth Tow Loop (6/1/2007 3:52:06 AM)

What'd you do to the frame behind the bumper to get it to mount up..  I stuck my head under there when routing my CB Coax and noticed there was no mounting plate welded to the frame like on the other 3 shackles..   If that 4th shackle is bolted just to the bumper and not bolted directly to the frame (through the bumper), I'd almost be willing to bet you hook anything to it and give it a goot hard yank and either the hook will rip out of the bumper or the bumper will get ripped off the truck..

Desert Dan -> RE: H3 fourth Tow Loop (6/1/2007 8:59:21 AM)

Chrome I can do with out
 
What did you put behind the bumper? Did you weld in a bracket to match the right side? Did you flatten out the bumper or cut a hole?
 
I think the Adventure model should have come with 2 tow hooks on the rear and a better place for the license plate.
 
I have thought about putting the licensce plate on the door or spare tire

Hummer Guy -> RE: H3 fourth Tow Loop (6/1/2007 9:39:34 AM)

quote:

ORIGINAL: Crash

If that 4th shackle is bolted just to the bumper and not bolted directly to the frame (through the bumper), I'd almost be willing to bet you hook anything to it and give it a goot hard yank and either the hook will rip out of the bumper or the bumper will get ripped off the truck..


x1000

Tinseast -> RE: H3 fourth Tow Loop (6/1/2007 1:03:34 PM)

 First off, my H3 is a base model without the towing package. I'm not sure if my frame bracket or license bracket would work on one with the factory hitch.  I use a front license plate frame from a Colorado and cut it down.  I attached it with two straps  that hook over the rear bumper step. Bought a license plate light assy  from Advanced Auto and bolted it to the license plate frame. Made an electrical plug that fit into the factory light plug with a jumper. Removed the existing license plate bolt snap nuts and replaced them with 2 GM (christmas tree) body plugs.  I layed out the tow loop bolt holes and drilled ( 2) 1/2" holes in the bumper
Since the rear bumper is not stamped for a tow loop on the left side, I had to make a steel shim  so the tow loop would set level on the bumper. I also cut a 1/8" rubber gasket to protect the bumper.
Attaching it to the frame required a welded bracket.  On the frame you will see a 2" x 2" square hole. I took a piece 2" square stock ( same as used on a hitch sleeve)  and welded ell brackets
to each side that meet the tow hoop bolts. It is in two pieces that bolts through the center.  Sorry I don't have better pics. I used 7/16"
stainlees steel grade 8 bolts on everything.
Tarheel 34, I live in eastern Kanawha county

Well tried to upload some pics, it says the file is to large

Crash -> RE: H3 fourth Tow Loop (6/1/2007 2:27:08 PM)

There ya go.. 

  

Page: [1] 2   next >   >>

Return to Hummer Forums home page or view the Full Version of this page.