Need Brush Guard Part Sizes (Full Version)

Hummer >> Hummer Lineup >> Hummer H2

Need Brush Guard Part Sizes

  

hudson4269 -> Need Brush Guard Part Sizes (4/30/2007 12:28:20 AM)

For the infinite hassle that Kachina Hummer has put me through, they provided me with a free brush guard.  The trouble is it was only free if I put it in myself, with no parts kit. LOL

So I was hoping someone knew what bolt sizes, washers, etc, are needed for the install.  Yeah, I could just eye ball it and hit Lowes/Home Depot, but I would feel better knowing I used the same sized/quality gear that is officially used.  I tried a few internet searches but I didn't have much luck.

  
ZYNE -> RE: Need Brush Guard Part Sizes (4/30/2007 9:08:39 AM)

While I don't recall the exact sizes here I believe the bolts fastening it to the stock mounting location was in the 2-2.5" category on my SMA brushguard.  Granted, it also attaches to the hood hinge location with a set of 1-1.5" bolts.  Anyway, moving on.  The stock location only required 4 washers all together.  Now, if you need to attach it to the hood hinge bolts as well, you will need an additional two washer and a couple of .75" (I think) spacers. 
If you pop the lower grille trim off you should see the 4 mounting holes for the BG.  Try some old bolts you've got laying around and once you get a fit, take it with you and go get some stainless steel ones :-)

As far as getting the actual mounting kit ... if it's the GM/OEM, why not contact the dealer?  They may be able to order a kit if it's actually possible.  If not, check ebay and see if you have any luck!

Big Guy -> RE: Need Brush Guard Part Sizes (4/30/2007 2:34:10 PM)

Easiest way...remove  1 of each bolt go to hardware store match them (don't worry you can take the H nothing will fall off) ZYNE has the right lengths above get a dozen washers and have at it... DO NOT stress the grill bolts.. space it with the washers...did mine last month

ZYNE -> RE: Need Brush Guard Part Sizes (4/30/2007 2:49:00 PM)

BigGuy, there are no bolts to be removed bro .. the mounting holes are empty.  And definitely don't strain those hood hinge bolts.  Either make a spacer of some steel tubing or pack up with washers, either way works though the washers will probably be a better choice!

Big Guy -> RE: Need Brush Guard Part Sizes (4/30/2007 4:31:09 PM)

Mine had bolts..and washers..i wonder if the dealer removed one that had been installed before I bought it.  I went across to my neighbors and as you said ZANE ,no bolts just holes...sorry hudson

ZYNE -> RE: Need Brush Guard Part Sizes (4/30/2007 4:37:52 PM)

If you are going to call me ZANE, at least put "IN" infront of it, ok LOL!  All joking aside, yeah, sounds like yours had something taken off. I had two VERY muddy bolt holes but no bolts lol ...

Big Guy -> RE: Need Brush Guard Part Sizes (4/30/2007 5:21:31 PM)

ZYNE when you get old like me you'll understand being forgetful ...when I walked across the street to look at my friends H2 for the bolts I had to go back a second time cause I forgot why I went the first time....sorry 

  

Page: [1]

Return to Hummer Forums home page or view the Full Version of this page.