final wheel choices!
Login  | |
|
|
|
|
|
RE: final wheel choices! - 4/15/2007 12:49:40 PM
|
|
|
Gunner_45
Posts: 1925
Score: 0
Joined: 12/14/2006
From: North Central Texas
Status: offline
|
Brother, I feel your pain.....I did the same when looking for my wheels.
What style did you finally decide on?
As for the bore diameter, it is critical....4WP's got mine wrong the first time ! ! !
They didn’t discover the error UNTILL AFTER everything had been dis-mounted,
re-mounted and the TPS modules swapped over.....I wanted to cry....But, they did
make it right.....Ultimately; if it will fit on a full size GM it will fit your hub.
I bet if you sweet talk ImportKiller, he can provide you with the exact bore size.
His Wheel-Fu is very strong.
I ended up with a 17X9 inch wheel, 4.5 inches back spacing and a 12.50X33 tire...Sticks out about 2 inches or so.
One last, un-asked for piece of advice....If you are choosing a cast wheel as opposed to a forged, make sure you
see it in person first ! ! What I found, was that the wonderful looking forged wheel with all the cool detents and crisp lines,
did not look the same in person as it did in the catalog. None of the edges were as sharp nor the details as defined as
they looked in the pics and the chrome was not quite as bright as you would expect.
Good luck.
_____________________________
ROTM –September 2007
2007 Adventure Pkg, Katzkin leather, CAI, SG II
Rock Rails, SMA b-guard, KC Lites, ProComp 6079’s W/Simulocks, Swamper TrXus MT’s
|
|
|
|
|
RE: final wheel choices! - 4/15/2007 6:22:02 PM
|
|
|
jm4490
Posts: 153
Score: 0
Joined: 11/26/2006
Status: offline
|
Akuza 381
 Attachment (1)
|
|
|
|
|
Printable Version
