|
minimdr -> 38s on a H3?? (4/7/2007 6:51:39 AM)
|
Would 38x11x16s fit a H3?
I ran across this on the NC4x4 forum. The guy is located in Johnson City , TN.
Here is his email address.
gubni at comcast dot net
38x11x16 mud tires
I have over 150 of these tires. They come with 3 part rims and a solid rubber beadlock-runflat. The lug pattern is unusable for anything more than a rock ring. The center hole measures over 8 inches across. The tires are Michelin XL and XZL tires on 16x6.5 rims. They are regroovable at for an additional 3/8 inch of tread once they wear slick. They are load range E tires. They have no dry rot or sidewall damage and range from 3 to 5 years old.
These are 16" tires, not 16.5" tires. They will fit on stock 16x7 or 16x8 wheels.
Price is based on tread depth measured with a cheap caliper. Numbers are percent of one inch. 4/10 means 40% of one inch or 13/32 of tread in the center of the tire. Price is per tire and they all come with rims. I will ship them.
Want to buy some? Reply to this thread, PM me, email me, or call 423-737-0265 -- Shawn
New tires! I have four 5.5/10 XL tread with michelin logo on tread surface $600 for the set pic SOLD OUT
5/10 XL tread $125 pic
4/10 XL tread $100 pic
3/10 XL tread $65 pic SOLD OUT
2/10 XL tread $35 pic SOLD OUT
New tires! I have six 7/10 XZL tread tires for $1500 (won't split up set) pic
6/10 XZL tires $200 pic
Here's two pics of the XL tread design.
[image]http://www.mustangfarm.com/LAV/LAV1.JPG[/image]
[image]http://www.mustangfarm.com/LAV/LAV4-10b.JPG[/image]
Here's two pics of the XZL tread design.
[image]http://www.mustangfarm.com/LAV/XZL1.JPG[/image]
[image]http://www.mustangfarm.com/LAV/XZL2.JPG[/image]
|
|
|
|
