So I cranked the Torsion Bars and.... (Full Version)

Hummer Forums >> Brand Reviews >> Drivetrain Area >> Suspension

So I cranked the Torsion Bars and....

  

aetherH3 -> So I cranked the Torsion Bars and.... (4/18/2006 11:26:03 AM)

I cranked them about 2.25 turns and it only gave me about .5". I think I'd rather put it back to stock than pay for an alignment for .5" and the added stress on the front suspension components...
Why is it that some trucks will level out with 2 turns and others gain almost nothing with about the same???

  
dilo2001gt -> RE: So I cranked the Torsion Bars and.... (4/18/2006 11:41:58 AM)

should just replace the two keys with new one and the alignment is on about $70.

Dennis -> RE: So I cranked the Torsion Bars and.... (4/18/2006 11:42:07 AM)

Did you have the front end off the ground while you cranked it?

dilo2001gt -> RE: So I cranked the Torsion Bars and.... (4/18/2006 11:43:46 AM)

should be less then two inches on stock you got 5in lifted on yours

rkcrawl -> RE: So I cranked the Torsion Bars and.... (4/18/2006 12:25:45 PM)

quote:

ORIGINAL: dilo2001gt

should be less then two inches on stock you got 5in lifted on yours


He said point 5", ie 1/2".


racepet -> RE: So I cranked the Torsion Bars and.... (4/18/2006 1:32:50 PM)

I cranked mine 3 turns last week and got 1 5/8". Much stiffer but I prefer it as stock is to soft. Have not gotten alignment yet. Much more agressive look.
took about 10 minutes and I did not jack front as not necessary.

aetherH3 -> RE: So I cranked the Torsion Bars and.... (4/18/2006 6:18:33 PM)


quote:

ORIGINAL: Dennis

Did you have the front end off the ground while you cranked it?



Indeed i did.

hum hum hum -> RE: So I cranked the Torsion Bars and.... (4/18/2006 7:13:54 PM)

i dide my 3 turn and it look gratejust need to get aligne

CruisinCarAudio -> RE: So I cranked the Torsion Bars and.... (4/19/2006 1:31:33 AM)

i want to know problems with off roading and breakage after cranking them

racepet -> RE: So I cranked the Torsion Bars and.... (4/19/2006 10:56:39 AM)

Anybody heard of ball joint spacers for the H3 yet?

  

Page: [1]

Return to Hummer Forums home page or view the Full Version of this page.