H3 door speakers

Hummer Forums Hummer Classifieds Photo Gallery Member List Calendars Search Forum FAQ Contact HF Sponsors
Hummer Lineup Hummer News Hummer Recalls TSBs Timeslips Register Login

H3 door speakers

Printable Version

Hummer Forum >> Brand Reviews >> Audio Visual/Interior Modifications >> H3 door speakers

Page: [1]

Message

<< Older Topic Newer Topic >>

H3 door speakers - 1/29/2007 8:18:43 AM

96TL

Posts: 13
Score: 0
Joined: 12/11/2006
Status: offline

Hello everyone. I’m ready to order new interior speakers for my H3. I decided to go with Crystal components up front, and Crystal coaxials in the rear. My only concern is the mounting depth. The front Crystals are pretty deep at 3.1”, and the rears are 2.938”. Do you guys think this would be a problem? I didn’t get a chance to pop off my door panels yet, and I really wanted to order these today. To those that swapped the speakers, what kind of speakers did you go with? I could use that as a reference.

Thanks!

Dom

Post #: 1

RE: H3 door speakers - 1/29/2007 12:47:32 PM

importkiller

Posts: 7254
Score: 0
Status: offline

I used infinity kappa perfects front and rear. The crystals should fit without a problem.

_____________________________

(in reply to 96TL)

Post #: 2

RE: H3 door speakers - 1/29/2007 12:56:43 PM

96TL

Posts: 13
Score: 0
Joined: 12/11/2006
Status: offline

Thanks importkiller. Did you have a hard time snaking in new speaker wires through the doors? Also, did you use MDF trim rings for the speakers?

Thanks!

(in reply to importkiller)

Post #: 3

RE: H3 door speakers - 1/29/2007 1:20:47 PM

FLYN325

Posts: 1
Score: 0
Joined: 1/29/2007
Status: offline

I just did speakers in all doors. I used Elemental Designs 6000.v2 components. Running the wire into the doors was kind of tricky. The rear doors were pretty east the front doors use a molex plug that you have to drill out a small hole to fit the wire through. Each front door took me about 30 mins. As for speaker ring they are needed beacuse they sit far inside the door and you want to bring the out closer to the door panel. Hope this helps.

(in reply to 96TL)