RE: Cold Air Intake for 07 H3
Login  | |
|
RE: Cold Air Intake for 07 H3 - 1/13/2007 4:21:16 PM
|
|
|
HummBob
Posts: 15972
Joined: 5/6/2006
Status: offline
|
You guys CrAcK mE uP!!!
_____________________________
2004 Black Hummer H2
2007 Black Escalade
 
|
|
|
|
|
|
|
|
|
RE: Cold Air Intake for 07 H3 - 3/10/2007 1:46:45 PM
|
|
|
Skoal
Posts: 57
Status: offline
|
What is the K&N part # for the 2007 3.7L H3 air intake kit? K&N's site does not list a kit, just the filter. What kit works for the 2007?
|
|
|
|
|
|
|
RE: Cold Air Intake for 07 H3 - 3/10/2007 2:16:50 PM
|
|
|
Obie1
Posts: 71
Joined: 2/18/2007
Status: offline
|
I was told by K&N that they don't make a FIPK for the 2007 H3.They also said that the more people that request one on their web site, the more likely they would be to make one.I'd like to install one on mine, but if they don't get with the program soon, I may have to go with an Air Raid or the GM Performance version.
|
|
|
|
|
RE: Cold Air Intake for 07 H3 - 3/10/2007 10:12:39 PM
|
|
|
HumRluvR
Posts: 233
Joined: 1/19/2007
From: Alberta, Canada
Status: offline
|
What's your opinion with True Flow Obie1???
_____________________________
06 Boulder Gray H3
Luxury Model, Adv Package.
Are you Canadian and would like to get together with
local HUMMER Owners for some Off Road Fun??? Then Check out
My Website
|
|
|
|
|
RE: Cold Air Intake for 07 H3 - 3/11/2007 11:17:01 AM
|
|
|
Obie1
Posts: 71
Joined: 2/18/2007
Status: offline
|
HumRluvR, I personally haven't run a True Flow on any of my vehicles yet. But I have had some experience with oiled foam elements on Harley motors and they do perform very well. I do see some good things about the True Flow. They should make the guys who spend a lot of time off road happy. Maintaining the factory air box should be better in the dirt(dust) and water and the foam filter should work better than a cloth one if it gets a little dirty out on the trail(until you can get home and clean it). Performance wise, they are all the same concept, K&N, Volant, Air Raid or True Flow should all offer similiar hp gains. The True Flow system looks like it would be easy to install and there's not a lot of parts so I would asume there price is reasonable(haven't seen a price).The only negative I've read, here on this forum, was that someone had a problem with their "air box vibrates and rattles" with a True Flow. Have you had any problems with this? Do their couplers have enough give in them to isolate the shake of the motor from the air box? It seems like it would be most noticeable at idle. If you tell me yours works great, I'll have to consider running one!
|
|
|
|
|
RE: Cold Air Intake for 07 H3 - 3/12/2007 10:28:52 PM
|
|
|
HumRluvR
Posts: 233
Joined: 1/19/2007
From: Alberta, Canada
Status: offline
|
Hey Obie1
I've been a K&N user for years until i ripped apart an intake on a Jimmy i once owned. I couldn't believe the amount of crap caked on the inside of the air tube, MAF, and on the throttle body valve!!! 
Foam is the only way to go for a full protection fas as i know... Especialy for off-roading use.
True Flow video more or less sold me on their product... Did you watch it???
As for the air box vibration... Yes it's there but very unnoticeable, more audible while in reverse in low RPM range, at idle... no, and in drive it depends on how cold the outside temp is.. 0c and lower is more apparent but again in low rpm range. What's causing this vibration is this coupler between the air box and the inner fender, if i can isolate this making it rigid to the air box... the noise would be gone!!!!
_____________________________
06 Boulder Gray H3
Luxury Model, Adv Package.
Are you Canadian and would like to get together with
local HUMMER Owners for some Off Road Fun??? Then Check out
My Website
|
|
|
|
|
RE: Cold Air Intake for 07 H3 - 3/12/2007 11:09:25 PM
|
|
|
Obie1
Posts: 71
Joined: 2/18/2007
Status: offline
|
Hi HumRluvR, I have been doing some research since your original post and I did watch the TF video, just this afternoon.I knew the foam was good but I was surprised how much dirt the gauze filter let through.Ouch. Unlike you, I never took apart the trottle body on my last truck, that a ran a K&N on.(Last time I saw it , it was on the lot at the Hummer dealer).I've read several reviews and they all were very positive(not all that surprising). I even e-mailed TF and asked them about "air box vibration". They replied back (in 20 minutes, no less) and said they were unaware of any such problems. Do you think if I turn up the stereo, I wouldn't notice it? Maybe a good cat back exhaust would drown it out completely.
But seriously, thanks for your advice. I'm looking to do the trifecta- CAI,performance exhaust and a pcm tune. Thanks to the guys and gals on this forum , there's lot of good info to sort through. I've all ready got a couple of vendors scoped out for the TF, so maybe I'll make the departure from K&N.
Let me kow when your ready to talk exhaust!
|
|
|
|
|
RE: Cold Air Intake for 07 H3 - 3/12/2007 11:25:48 PM
|
|
|
HumRluvR
Posts: 233
Joined: 1/19/2007
From: Alberta, Canada
Status: offline
|
Your very welcome Obie1!!! 
Matter of fact bud... I'm currently waiting on a loaner PCM from PCM forLess, and i'm planning of picking up a Cat-Back from Gibson in a month or so... Good price, and great reviews from here, and most of all....Dennis Likes it!!!
_____________________________
06 Boulder Gray H3
Luxury Model, Adv Package.
Are you Canadian and would like to get together with
local HUMMER Owners for some Off Road Fun??? Then Check out
My Website
|
|
|
|
|
RE: Cold Air Intake for 07 H3 - 3/16/2007 6:03:49 PM
|
|
|
HUMMER DRIVER
Posts: 447
Joined: 3/12/2007
Status: offline
|
Guys,
I just received a K&N Air Charger Cold Air Intake P/N #63-1095. After looking on ebay and this forum last week I ASSUMED it was the right one for my H3 unfortunately it isn't. I have an 07 H3 and it simply won't work...
The Mass Air Sensor and mounting bracket that bolts to the intake tube is different that the 06 model and 07. The 07 mass air sensor is so large it won't even go into the hole on the intake tube, nor would the stock bracket align with the holes in the new tube.
I wish I had called K&N first like Obie1 did, I didn't realize the darn thing wouldn't fit, nor did I see anywhere that it wouldn't work.
So....... if someone wants a K&N CAI for an 06 H3, I have one! The vendor will charge me a 15% restocking fee if I return it, I've not talked to them about this yet, not sure if they'd take it back at all after it's been opened. I unwrapped everything out of the box and put the seal around the air dam and bolted the vertical bracket to it. After doing that I was looking at the air sensor assembly on the Hummer and looked at the tube and realized it's not going to work.
If someone wants this one for their 06 let me know before I send this thing back. Please send me a PM if you're interested.
Thanks!
Raymond
< Message edited by HUMMER DRIVER -- 3/16/2007 7:02:51 PM >
|
|
|
|
|
RE: Cold Air Intake for 07 H3 - 3/16/2007 7:21:14 PM
|
|
|
Obie1
Posts: 71
Joined: 2/18/2007
Status: offline
|
 Hummmer Driver
Sorry to hear that the K&N did not work out. I am a K&N fan and have used them in the past. I pointed out to them that some vendor sites list their CAI's as fittting both 06' and 07' H3's. Their only response was "we do not make a cold air intake for your vehicle". They would not say why.Now I know there's a good reason.
Your best bet might be to send it back to the vendor. For someone to buy it from you, you might have to make them a better deal than 15% off.
My patience wore thin so I took HumRluvR's advice and ordered a True Flow.There a couple of interesting twists with the True Flow 1) their tube mounts between the mass air sensor and the throttle body- so your problem wouldn't be an issue and 2) if your dead set against using a foam element, since they maintain the factory air box, you could run a K&N filter, which they do make for the 07 H3.(All though you have to buy two filters).
I have every reason to beleive the True Flow will be a good system.
Good Luck with yours.
|
|
|
|
|
Printable Version
My hummer doesn't have a cold air intake yet but with my old car I did install one. It's a good add-ons to increase performance inexpensively. I've had this 
