Hummer Forums   Hummer Classifieds   Photo Gallery   Member List   Calendars   Search   Forum FAQ   Contact HF   Sponsors
  Hummer Lineup   Hummer News   Hummer Recalls   TSBs   Timeslips   Register   Login


torsion adj..

  Printable Version
Hummer Forums >> Brand Reviews >> Drivetrain Area >> Suspension >> torsion adj.. Page: [1]
Login
Message << Older Topic   Newer Topic >>
torsion adj.. - 12/28/2006 7:53:06 AM   
jm4490



Posts: 148
Joined: 11/26/2006
Status: offline 		So I went back and read alot of the posts about torsion adj. to level out the trucks look. I want to know after alot of you have done this and have driven the truck for a while is there any change in the ride/handling?? I just have this horrible idea in my head of when i had my gmc jimmy i had my torsion bars cranked up so i could get a little more clearance in the front end and the ride went to Holy Hell ! I was bouncing all over the road..I just don't want to feel like the in a new ride with only 700 mi on it..
Post #: 1
RE: torsion adj.. - 12/28/2006 11:01:16 AM   
bonzaiii


Posts: 221
Joined: 11/7/2006
Status: offline
bonzaiii's photo gallery 		I cranked mine 2 1/2 turns and don't really notice any difference in the ride at all. 

(in reply to jm4490)
Post #: 2
RE: torsion adj.. - 12/28/2006 11:13:09 AM   
Barry Weeks

 

Posts: 13
Joined: 7/31/2006
Status: offline 		I did the same as far as reading many responses. I raiesed mine 2.5 rounds each side as it almost level. I did notice a slightly harder ride in the front but not bad. My wife couldn't notice a change. I did have an alignment and was out quite a bit.

(in reply to jm4490)
Post #: 3
RE: torsion adj.. - 12/28/2006 3:50:01 PM   
importkiller

 

Posts: 7253
Status: offline
importkiller's photo gallery 		your ride will get a little firmer, if your Jimmy was bouncing all over the road your t-bars were probably worn out and or you were maxed out on your shock travel.

_____________________________


(in reply to Barry Weeks)
Post #: 4
RE: torsion adj.. - 12/28/2006 5:28:45 PM   
jm4490



Posts: 148
Joined: 11/26/2006
Status: offline 		There is nothing worse than a maxed worn out Jimmy !!

(in reply to importkiller)
Post #: 5
RE: torsion adj.. - 12/28/2006 6:38:48 PM   
naluboy



Posts: 104
Joined: 10/16/2006
Status: offline
naluboy's photo gallery 		I just cranked my t-bars this past Saturday (well, not me, but the place that I got my new tires from). It was late in the afternoon nearing closing, so they were kinda rushing. I wish the guy kept track of how many times he turned it, but he was using an impact wrench and were 'going by eye' until there was enough clearance for the 35s. I'm assuming it was anywhere between 2.5 - 3 turns. The driver side needed a little more to even out. The ride did get a lot stiffer, but the wifey just assumed it was because of the tires. She really digs the beefy look with the new tires so she sort of accepted it. I took it in to align on Tuesday and it was way off. The dealer had a hard time getting the computers to sink with the sensors. There claim was because of the height of the new tires? 5 hours later it was done w/ specs in hand. Also contributing to the rough ride is that the tires were inflated to 50lbs each. I dropped it to 35 and it helped a little, still too rough for me so I ordered a truxxx kit yesterday, it will be here next Wednesday. Too many potholes around here so I felt I had no other option

_____________________________



--------------------------------
I'm going nuckin' futs!
'06 White lux - Blingin' in mudd!

(in reply to jm4490)
Post #: 6
RE: torsion adj.. - 12/28/2006 6:57:59 PM   
importkiller

 

Posts: 7253
Status: offline
importkiller's photo gallery 		used an impact gun on a t-bar adj. bolt?!?!?!  I would guess you are wayyy over 3 turns if thats the case. Plus the ride with 3 turns isn't even noticably different. I assume he cranked the t-bars so much that you are maxxed out on shocks and probably sitting on the bumpstop. BTW...35's WILL clear without any t-bar lift or relocation keys....bone stock will clear a 35" tire with no problems.

_____________________________


(in reply to naluboy)
Post #: 7
RE: torsion adj.. - 12/28/2006 6:59:30 PM   
importkiller

 

Posts: 7253
Status: offline
importkiller's photo gallery 		make sure to get another alignment once you install the truxx lift too.

_____________________________


(in reply to importkiller)
Post #: 8
RE: torsion adj.. - 12/28/2006 8:31:32 PM   
naluboy



Posts: 104
Joined: 10/16/2006
Status: offline
naluboy's photo gallery 		yeah, I was kind of questioning why he was using an impact.

btw, I need to give props where props are due. Thanks IK for all the advice on tires in previous threads. I finally picked up the Mickey Thompson MTZ 315/75/16s. A whole lot of sidewall, but I kind of like the beefy look. I guess I'll have to stock up on Mcguires tire dressing, damn I used a whole can. I haven't had a chance to take some pix, weather here is pretty crappy. But I'll get some up eventually

thanks again

_____________________________



--------------------------------
I'm going nuckin' futs!
'06 White lux - Blingin' in mudd!

(in reply to importkiller)
Post #: 9
RE: torsion adj.. - 12/29/2006 12:31:44 AM   
importkiller

 

Posts: 7253
Status: offline
importkiller's photo gallery 		your very welcome......now go get some pics!!!!!

_____________________________


(in reply to naluboy)
Post #: 10
RE: torsion adj.. - 12/29/2006 2:35:20 AM   
naluboy



Posts: 104
Joined: 10/16/2006
Status: offline
naluboy's photo gallery 		If I recall correctly IK, did you say your tires didn't rub at all? It must be that slight offset of your rims that allows a little more clearance on the inside. My new tires rub, although only when fully cranked on either side. It's rubbing against the sway bar, so nothing that could cause any serious damage. I think. Because I'm using the stock rims, do you think adding spacers (1/2") to the front rims to push it out a little would eliminate rubbing? I've never used spacers before, does it mess with your alignment?

_____________________________



--------------------------------
I'm going nuckin' futs!
'06 White lux - Blingin' in mudd!

(in reply to importkiller)
Post #: 11
RE: torsion adj.. - 12/29/2006 2:39:53 PM   
importkiller

 

Posts: 7253
Status: offline
importkiller's photo gallery 		stock rims will probably rub with the mickeys, I know a few guys running BFG on stockers and they don't rub at all but the BFG are not as wide as the MTZ's. You can add spacers if you want, I have them on my jeep for this very reason and have had no problems in over 50,000 miles now. I don't think you will need an alignment again as all your doing is pushing the rim towards the fender and not changing the camber or caster.

_____________________________


(in reply to naluboy)
Post #: 12
RE: torsion adj.. - 1/5/2007 7:51:33 PM   
inked


Posts: 252
Joined: 5/26/2006
Status: offline
quote:

ORIGINAL: naluboy

yeah, I was kind of questioning why he was using an impact.

btw, I need to give props where props are due. Thanks IK for all the advice on tires in previous threads. I finally picked up the Mickey Thompson MTZ 315/75/16s. A whole lot of sidewall, but I kind of like the beefy look. I guess I'll have to stock up on Mcguires tire dressing, damn I used a whole can. I haven't had a chance to take some pix, weather here is pretty crappy. But I'll get some up eventually

thanks again


Hey Nalu,

Any pics of the new beefier H3? Were you just at Pflueger the other day? Man, we have to go on a run real soon!!

_____________________________

.......................................................

4X4BOYZ.COM - "Get it Dirty!"



(in reply to naluboy)
Post #: 13
RE: torsion adj.. - 1/6/2007 1:52:25 AM   
naluboy



Posts: 104
Joined: 10/16/2006
Status: offline
naluboy's photo gallery 		Yo Marc! Yup was there, met up with Brandon. I had to get the new meats before the Feb. run, but definitely would do some trials with da boyz prior

I'm putting in the Truxxx kit tomorrow so I'll post some pics (weather permitting)...It was pretty stupid to have the thing aligned, only to decide later that I wanted to drop the truxxx kit in it, only to have to align it again!!! what a waste of money! Well, i just hope it's worth it.

_____________________________



--------------------------------
I'm going nuckin' futs!
'06 White lux - Blingin' in mudd!

(in reply to inked)
Post #: 14
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Hummer >> Brand Reviews >> Drivetrain Area >> Suspension
Jump to:


Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Hummer Prices

Hummers
Hummer H1
Hummer H2
Hummer H3



Featured Sponsors
Advertising Info

Top 10 Posters
hummbob15682
3hummers11687
muddydawg759951
importkiller7253
blackstangs26772
hummerguy6650
trey1244577
rhill204547
h34 pleasure3711
shortbus3600

New Vendors
TSS Radio
AMSOIL - Performance Oil Technology
G-Style Hummer Accessories
K&N Engineering, Inc.

Contact Us | Advertising | Automotive Directory | About Us | Link To Us | Archive | Hummer Links | Legal | Privacy Policy | © Hummer Forums.com

Hummer Forums .com is not affiliated with or endorsed by General Motors Corporation.