H3 with a small growling noise at 1800 rpm

  Printable Version
Hummer Forums >> Hummer Forums - General >> General Hummer Talk >> H3 with a small growling noise at 1800 rpm Page: [1]
Login
Message << Older Topic   Newer Topic >>
H3 with a small growling noise at 1800 rpm - 11/10/2008 8:07:28 PM   
cheyenne95129

 

Posts: 8
Joined: 2/15/2008
Status: offline
I have a 2006 H3 with the automatic trans that has around 40k miles. It started making a small growling noise from somewhere in the the front when driving slow in any gear. It does not seem to make the noise in neutral but only when driving. Therefore, Im thinking its not  fan belt or power steering related.
No matter if in 1st 2nd 3rd or drive at about 1800 -1900 rpms it makes a steady growling and below or above these rpms, the noise goes away. Also, there is a intermittent 2 second boooooop sound from under the driver side.
Any ideas?
The H3 runs just fine otherwise

Thanks

Cheyenne

cheyenne95129@yahoo.com

Post #: 1
RE: H3 with a small growling noise at 1800 rpm - 11/19/2008 4:11:03 PM   
johnnyballistic

 

Posts: 5
Joined: 11/14/2008
Status: offline
Does this noise occur only when moving? If so try checking simple things first. Example brake pads, calipers, and disks. Let me know more specifics on the noise and when it is heard.


(in reply to cheyenne95129)
Post #: 2
RE: H3 with a small growling noise at 1800 rpm - 11/19/2008 7:46:38 PM   
cheyenne95129

 

Posts: 8
Joined: 2/15/2008
Status: offline
Thanks for the response.
Only makes noise when in gear at any speed but at 1850 rpm or so.
Same noise if turning or going straight. Makes the loudest sounds first thing in morning.
When I rev engine in park or neutral no sound.
When on freeway at 1800 rpm in top gear noise is still there.
Sound gets quieter as things heat up but still detectable.
Thought it was a loose fan belt at first and put belt dressing on it but it didnt help, besides it doesnt make the sound in neutral or park, just when in gear and at 1800 - 1900 rpm. I am thinking it may be a power steering pump bearing or something like that but the noise started abrubtly out of nowhere and never changed. besides if it were a ps bearing it should show when revving it in neutral or park right?
Any thoughts?

Thanks

Cheyenne

cheyenne95129@yahoo.com

(in reply to johnnyballistic)
Post #: 3
RE: H3 with a small growling noise at 1800 rpm - 11/23/2008 6:18:31 PM   
cheyenne95129

 

Posts: 8
Joined: 2/15/2008
Status: offline
More on the sound. It sounds more like a hum and buzzing sound- I looked for any plastic or sheetmetal loose didnt see anything or feel anything loose. Some sort of harmonic vibration possible but it is hard to find as it only happens while moving. I cannot get it to do it when stopped. Looked at the brakes, nothing unusual seen. I believe The sound is from the front right of the 2006 H3 it goes away or reduces its intensity after driving a few miles and things get warm.  Checked the AT level, PS level and looked inside the hood.

Any ideas?

Thanks

CMN

(in reply to cheyenne95129)
Post #: 4
RE: H3 with a small growling noise at 1800 rpm - 11/24/2008 7:40:17 AM   
HumminNBoatin


Posts: 483
Joined: 9/9/2007
Status: offline
HumminNBoatin's photo gallery
I have the same problem with my 2003 H2.  Mine started after an offroad trip.  I dented up the exhaust a little bit.  I bent the underbody protection back out off of the exhaust system but still have the same as you.  I inspected/replaced fluids in my diffs and transfer case and thats not the problem.  Any help or ideas would be great.  My gut tells me transmission.  I will find out next week when i pull the pan and change fluids etc....

_____________________________

Here's to the Stars
Partying like Rock Stars
Looking like movie Stars
and Getting Hummers like Porn Stars!!

Official THCI Member ...Currently Obtaining HOPE Cert.

(in reply to cheyenne95129)
Post #: 5
RE: H3 with a small growling noise at 1800 rpm - 11/24/2008 6:09:39 PM   
cheyenne95129

 

Posts: 8
Joined: 2/15/2008
Status: offline
Thanks for the reply- good luck with the tranny hope this isnt the issue as that might be expensive. I had a bad tranny bearing in a Honda but the noise is way different. The Honda made a constant whine at all speeds not at just one rpm. This noise is like something is vibrating or rubbing and only at 1850 rpm either accelerating or slowing. All gears, havnt tried reverse. Drive 1st 2nd 3rd in 4 wheel low and high.  Just like clockwork at 1850 rpm. Glad it is harder to hear once the truck warms up. I dont see any performance difference, just makes that damm sound.
Last time I had a unexplainable sound on another car,I changed the tires and it went away. Im due for a tire rotation soon, I hope this takes care of it, I dont know why tires would make the difference.
I have worked on many cars with many different sounds, this sound is a real pain to find.
This noise came out of the blue. I did not go off road prior to this noise. Please keep me updated as even though I have a H3 and you have a H2, it would be worth knowing what the final solution for you was.

Thanks

CMN

(in reply to HumminNBoatin)
Post #: 6
RE: H3 with a small growling noise at 1800 rpm - 12/1/2008 7:09:55 AM   
HumminNBoatin


Posts: 483
Joined: 9/9/2007
Status: offline
HumminNBoatin's photo gallery
Problem solved!

I was under my truck on Turkey Day.  Working on some other stuff. 

I notice the skid plate under the Transfer case was in contact with the case.  I got a crowbar out and bent it back off the skid plate to give it about 3/4 inch of clearance.  Problem was solved.

I know you said you have not had it off road.  But if you have skid plates I would crawl under your truck and take a look at them. 

Maybe you have a family member who drove it offroad and did not tell you??? lol

Eric

_____________________________

Here's to the Stars
Partying like Rock Stars
Looking like movie Stars
and Getting Hummers like Porn Stars!!

Official THCI Member ...Currently Obtaining HOPE Cert.

(in reply to cheyenne95129)
Post #: 7
RE: H3 with a small growling noise at 1800 rpm - 12/1/2008 7:57:10 AM   
JAM

 

Posts: 14
Joined: 7/23/2007
From: FRANCE
Status: offline
I have the exact same sound as Cheyenne, on a 2007 H3. It is a metallic kinda sound, and as the original poster said, even more noticeable when cold... I might have to check the skidplates even if i never really offroaded it...
It comes, indeed, from the front right side of the truck, you can hear it even lounder with the passenger window down.

(in reply to HumminNBoatin)
Post #: 8
RE: H3 with a small growling noise at 1800 rpm - 12/1/2008 9:00:43 AM   
Doc Olds


Posts: 3881
Joined: 7/11/2007
From: Boat Town USA (Michigan 48045)
Status: offline
Some 3s had the exhaust manifold heat shield come in contact with the manifold/truck and make a buzzing sound?   Check that too when snooping around.  The cure is to bend it a bit to make sure it is not in contact with anything creating the vibration sound..... and that shield noise does change with engine heat.   Good luck.

(in reply to JAM)
Post #: 9
RE: H3 with a small growling noise at 1800 rpm - 12/1/2008 9:32:17 AM   
cheyenne95129

 

Posts: 8
Joined: 2/15/2008
Status: offline
I took both bash plates off to do a oil change. Drove without the plates and the noise is still there. I will try the exaust shield next week

Thanks Again

Cheyenne

(in reply to Doc Olds)
Post #: 10
RE: H3 with a small growling noise at 1800 rpm - 12/2/2008 1:58:21 PM   
cheyenne95129

 

Posts: 8
Joined: 2/15/2008
Status: offline
OK! I think I found the problem. Today I noticed a stud coming through the exhaust heat shield without the nut and washer, it looks like it fell off. There are two other studs with nuts and washers. I called Hummer and they say it in stock for .53 cents. I will go to the hardware store on the way home as the Hummer dealer is a long ways in the opposite direction.

Ill post later if this worked. Thanks All for your assistance!

Best Holiday Wishes

Cheyenne

(in reply to cheyenne95129)
Post #: 11
RE: H3 with a small growling noise at 1800 rpm - 12/3/2008 4:44:17 PM   
cheyenne95129

 

Posts: 8
Joined: 2/15/2008
Status: offline
SUCCESS!!!!!! Replaced the missing 6mm nut and washer noise went away. Also tightened the two other nuts that were still there and they were finger tight.
Noise GONE!
 
Thanks All!
One other thing, while under the H3 I noticed that the 1/2 inch bolts to the tranny pan were loose ( finger tight) and there was fluid weepage. Tightened them slightly,uniformly as the loose bolts are something reminiscent of my Harleys. Readers, might want to check these as they might be loose on your H3 too

(in reply to cheyenne95129)
Post #: 12
RE: H3 with a small growling noise at 1800 rpm - 12/4/2008 1:31:05 AM   
JAM

 

Posts: 14
Joined: 7/23/2007
From: FRANCE
Status: offline
cool! Thanks for the report, I''ll check mine this week-end...

(in reply to cheyenne95129)
Post #: 13
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Hummer >> Hummer Forums - General >> General Hummer Talk
Jump to:




Featured Sponsors
Advertising Info

Top 10 Posters
hummbob16229
3hummers11839
muddydawg759966
importkiller7254
blackstangs26834
hummerguy6689
trey1244628
rhill204549
doc olds3881
h34 pleasure3735

New Vendors
StrutMasters
Hummer Parts Club
Sewell Parts Online
AMSOIL - Performance Oil Technology
G-Style Hummer Accessories

Hummer Forums .com is not affiliated with or endorsed by General Motors Corporation.