UPDATE: Please HELP! Both of the turn signal light fuses blow
Login | |
|
UPDATE: Please HELP! Both of the turn signal light fuse... - 6/8/2008 5:55:40 PM
|
|
|
SafariHummerH2
Posts: 128
Joined: 1/18/2008 Status: offline
|
I tried to add some rear lights to my 2003 H2 by splicing into the trailer hitch harness. I was very careful to splice into the correct wires. When I used my turn signals left and right, I heard the flasher relay clicking very fast then the two 10 Amp turn signal fuses (one for left and one for right) inside the side panel blew! I immediatly disconected my splice connections, restored everything as from the factory and installed two new fuses, tried the turn signal lights and the fuses blew again! I replaced the flasher relay ($65) and installed two new fuses again and tried the turn signal lights and the fuses still blow! SOMEBODY PLEASE HELP! After extensive troubleshooting, I figured it out. Some electrical circuits on an H2 such as the turn signal circuit and the marker lights circuit have there own return circuit grounding path. Chassis ground is NOT part of the turn signal and the marker light return grounding circuit. By adding some external lights by splicing into these circuits and grounding through the chassis caused the turn signal fuses to blow. So extreme care must be taken when adding lights and what circuit you splice into. Thank you all for all your advice. Safari Hummer H2
< Message edited by SafariHummerH2 -- 6/9/2008 7:34:37 PM >
|
|
|
|
|
|
Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Hummer Prices
Hummers
Hummer H1
Hummer H2
Hummer H3
Advertising Info
|
Contact Us |
Advertising |
Automotive Directory |
About Us |
Link To Us |
Archive |
Hummer Links |
Legal |
Privacy Policy |
© Hummer Forums.com
Hummer Forums .com is not affiliated with or endorsed by General Motors Corporation.
|