|
crank -> RE: Roof Marker Lights (New Version?) (9/27/2006 8:36:13 AM)
|
I got real excited when I saw this and I wrote my dealer to get mine replaced. Unfortunatly it looks like this is not the fix. The following is the reply back from the dealer: "Mr. Crank, Although I became excited when I thought that you found information that I did not have, I researched and found that the part number that you quote in your email is the same part that has been quarantined (see message from GM below). I searched further and found that there is no new information available from Hummer to date. We will be in touch when a fix is available. Subject: Quarantine Request H3 Accessories Roof-Mounted Marker Lamps - keywords accessories accessory lights windshield #PIT4021B - (09/15/2006) Models: 2006 Hummer H3 This PI has been revised to reflect a new fix is coming, This PI has been revised to change when the revised part should be available. please discard PIT4021A. The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI. Condition/Concern: There is a wind noise from the roof mounted Marker Lamps or Off Road Lamps. This may also sound like it is coming from the top of the windshield area. Recommendation/Instructions: Effective immediately, please quarantine all inventory of the H3 Accessories Roof-Mounted Marker Lamp Package (P/N 19156090, P/N 17803066, P/N 12499109). Although a Service Repair Kit was released in November 2005, it has proven over time to be insufficient as a long term solution to eliminate the wind noise associated with this product. A more robust fix has been identified and a "revised" Service Repair Kit will be released in November 2006 for product currently in the field. In addition, the design and manufacturing process for this lamp package will be revised to permanently eliminate the wind noise condition. Follow-up communications will be issued once this repair kit is released. A Stop Order is in place for RPA orders associated with this product and all ACO orders are currently being written to backorder. Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed." I'll keep everyone in the loop as soon as they tell me.
|
|
|
|