RE: H1 Soft Top - take on/off help (Full Version)

Hummer Forums >> Hummer Lineup >> Hummer H1

RE: H1 Soft Top - take on/off help

  

3hummers -> RE: H1 Soft Top - take on/off help (5/11/2008 4:47:51 PM)

She's a beauty

  
xzachx2112 -> RE: H1 Soft Top - take on/off help (5/11/2008 5:37:01 PM)

nice picture! show 'em what hummers are made of![8D]

3hummers -> RE: H1 Soft Top - take on/off help (5/11/2008 7:55:47 PM)

Injun uses his Hummer in all the right ways

yellow7 -> RE: H1 Soft Top - take on/off help (5/12/2008 11:09:31 AM)

Well I took it off this weekend and it was surprisingly easy. Putting back on solo was a little hard to get the front in the channel, but otherwise it was easy.

3hummers -> RE: H1 Soft Top - take on/off help (5/12/2008 11:33:55 AM)

How long did it take to put back on?

ronb -> RE: H1 Soft Top - take on/off help (5/12/2008 11:52:15 AM)

a bit of silicone in the channel makes it easier -- the rest is an easy 10 minute job of tightening straps and cinching velcro. It's pretty cool driving around in a convertable that big. Eating dirt on the trail is another story though.

yellow7 -> RE: H1 Soft Top - take on/off help (5/12/2008 12:33:42 PM)

Probably took about 5-10 minutes to take off and about 10-15 minutes to put back on by myself. If I had another person feeding the front into the channel while I pulled it across it would have been REAL easy.

Not sure how the other tops are but I have a 2002 thats insulated and most of it is velcro with just the front and then either side in the back by the roll bars sliding down a channel like the front.

3hummers -> RE: H1 Soft Top - take on/off help (5/12/2008 1:16:22 PM)

Good to know. Thanks

BigKofJustice -> RE: H1 Soft Top - take on/off help (5/27/2008 4:56:20 PM)

A handy tip to make putting the top back on a 1 man job, spray the A-pillar channel at the front with Silicon lube spray.

I do this with any channels (ie. window channels as well) keeps things nice and lubricatted, and makes sliding the top off the A Pillar super easy.

Not sure how this works with pre-98 trucks since they have a different method of sliding the top on.



  

Page: <<   < prev  1 [2]

Return to Hummer Forums home page or view the Full Version of this page.