|
warriorking -> RE: head valve (4/30/2008 6:22:44 PM)
|
The problem GM has is with the intake valve seating properly,if it leaks you get a misfire at idle only.If you get a miss at other throttle positions than idle,then you don't have a cyl.head issue,but possibly injector or coil on plug shorting out,I've found alot of #2 cyl.coils corroded due to water leaking in through the hood plate directly above cyl.2.The head issue has a cutoff point.the last 6#'s of the V.I.N.287591,if anyone has a V.I.N. lower than the cutoff then you may have the issue.any number above the cutoff already has the hardened seats.It's also more noticable in colder climates,and usually only in the winter months.hope this helps! WK
|
|
|
|