supercharger who has fitted?
Login | |
|
supercharger who has fitted? - 4/29/2008 9:49:01 PM
|
|
|
stubbsy
Posts: 40
Joined: 4/29/2008 Status: offline
|
Hi there has anyone fitted W2W Rotrex supercharger kit to a 3.7 2007 H3 or can you direct me to a thread that has this topic discussion. Cheers
_____________________________
He with the most toys will probably die sooner but have a smile on his face
|
|
|
|
|
|
RE: supercharger who has fitted? - 4/29/2008 11:18:37 PM
|
|
|
skippy
Posts: 309
Joined: 2/4/2008 Status: offline
|
a bloke in brendale installed one at 22psi and blew the engine apart so i am holding back until he sort it out
_____________________________
|
|
|
|
RE: supercharger who has fitted? - 4/29/2008 11:39:30 PM
|
|
|
H3 Xman
Posts: 148
Joined: 9/17/2007 Status: offline
|
Yea i'm also really hesitant when it comes to adding on things under the hood. I've heard too many horror stories!
_____________________________
'07 Sonoma Red Metallic H3X Ebony Leather Interior LOADED!! AKA "the chick magnet"
|
|
|
|
RE: supercharger who has fitted? - 4/30/2008 1:19:46 AM
|
|
|
skippy
Posts: 309
Joined: 2/4/2008 Status: offline
|
stubbsy don't forget to vote for me in the ride of the month it finishes tonight
_____________________________
|
|
|
|
RE: supercharger who has fitted? - 4/30/2008 2:44:28 AM
|
|
|
stubbsy
Posts: 40
Joined: 4/29/2008 Status: offline
|
You just got my vote Skip, I would cry if my H3 got that dirty as it would take me a week to clean it. we went off road at Xmas time mountain biking 70km of dirt and dust and stone chips it took 2 months to get it clean again.
_____________________________
He with the most toys will probably die sooner but have a smile on his face
|
|
|
|
RE: supercharger who has fitted? - 4/30/2008 3:22:42 AM
|
|
|
skippy
Posts: 309
Joined: 2/4/2008 Status: offline
|
cheers it is getting close!
_____________________________
|
|
|
|
RE: supercharger who has fitted? - 4/30/2008 10:41:15 AM
|
|
|
heavyD
Posts: 32
Joined: 4/5/2008 Status: offline
|
22 PSI, what was he thinking, That is extremely high unless his block was sleeved.You should never run more then 8-10 psi on a stock motor.
|
|
|
|
RE: supercharger who has fitted? - 4/30/2008 10:56:10 AM
|
|
|
GarrettMoore
Posts: 166
Joined: 4/25/2007 Status: offline
|
Agreed. Especially on a blower... His intake temps must have been absurd.
|
|
|
|
RE: supercharger who has fitted? - 4/30/2008 2:12:32 PM
|
|
|
hma03
Posts: 98
Joined: 3/3/2008 Status: offline
|
Sorry Skippy but he actually fitted the Turbotecnics Turbo..the same one I have had fitted. He took that to 22 and blew his engine and has declared they are a heap of crap and is now fitting a supercharger. The turbo he said is crap is working fine on mine so far. I am really pleased with the increased power...just gotta do something about the bloody blow off valve..sounds like the exhaust hitting the chasis each time it goes off! Of course because I drive so sedately, it doesn't go off very often....much!!!!!!!!!!!!!!
_____________________________
4" Rancho lift-custom paint, #35" Baja MTZ,17" steel rims, extended rear shackles, GM rock sliders, GME UHF radio, side mount UHF ariel, Pioneer AVIC, cargo barrier, 60L water tank, dual battery, custom drawer system, turbonetics turbo,500W inverter
|
|
|
|
RE: supercharger who has fitted? - 4/30/2008 2:40:24 PM
|
|
|
GarrettMoore
Posts: 166
Joined: 4/25/2007 Status: offline
|
Any pics of that setup hma03?
|
|
|
|
RE: supercharger who has fitted? - 4/30/2008 3:49:16 PM
|
|
|
hma03
Posts: 98
Joined: 3/3/2008 Status: offline
|
Hi GarrettMoore, Have posted the whole story over on HummerX http://www.hummerxclub.com/forum/viewtopic.php?f=25&t=6866&st=0&sk=t&sd=a If people would prefer to see it here I can but will take some time. Happy to answer any questions.
_____________________________
4" Rancho lift-custom paint, #35" Baja MTZ,17" steel rims, extended rear shackles, GM rock sliders, GME UHF radio, side mount UHF ariel, Pioneer AVIC, cargo barrier, 60L water tank, dual battery, custom drawer system, turbonetics turbo,500W inverter
|
|
|
|
RE: supercharger who has fitted? - 5/1/2008 3:15:54 PM
|
|
|
hma03
Posts: 98
Joined: 3/3/2008 Status: offline
|
I have just spoken with the guy who fitted the turbo and he was not happy with the apparrent mis- reporting. He bought a H3 and immediately rebuilt the motor in his performance workshop. He then fitted the turbo as an R&D project and took it to 22 at which time the turbo shaft broke. This was done to test the limits of the kit as he has told me that he tests kits/products on his own car before fitting to customers. I beleive this to what happened but he has a strong accent is sometimes difficult to understand. He also told me that the kit requires quite a bit of additional work such as a bigger fuel pump, ceramic coating of pipes and moving of the air temp sensor. The question is that if it is necessary why wasn't it included in the kit from Turbo tecnics. I am happy with my turbo at the moment, but if he proves to be right and I have additional cost or reliability problems down the track I will be pretty pissed as there was no mention of this when the kit was purchased. Maybe someone from Turbotecnics, who are monitoring the forum and forwarded the thread to him, will now come out from behind the curtain and explain the situation. Does their kit require this additional work or not. I have given the kit a good report on this and other forums so i would appreciate them putting my mind at ease..are they right or is he?
_____________________________
4" Rancho lift-custom paint, #35" Baja MTZ,17" steel rims, extended rear shackles, GM rock sliders, GME UHF radio, side mount UHF ariel, Pioneer AVIC, cargo barrier, 60L water tank, dual battery, custom drawer system, turbonetics turbo,500W inverter
|
|
|
|
Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Hummer Prices
Hummers
Hummer H1
Hummer H2
Hummer H3
Advertising Info
|
Contact Us |
Advertising |
Automotive Directory |
About Us |
Link To Us |
Archive |
Hummer Links |
Legal |
Privacy Policy |
© Hummer Forums.com
Hummer Forums .com is not affiliated with or endorsed by General Motors Corporation.
|