Steering shaft noise FIX. (Full Version)

Hummer Forum >> Hummer Lineup >> Hummer H3

Steering shaft noise FIX.

CWS -> Steering shaft noise FIX. (4/24/2008 4:01:33 PM)
On my way home, I bought an issue of Four Wheeler magazine, the June issue to be precise. Anyhoo... located inside is an article titled "CLUNK NO MORE". Turns out that it's a two and a half page article with loads of pictures on fixing the GM steering shaft noise that I keep reading threads about. After a dissertation on the hows and whys of the 'clunking' and some of the GM 'fixes', they show an installation of an aftermarket shaft that cures the noise. It's a Borgeson Universal replacement intermediate shaft. This thing is more beefy than Chef Boy-ar-dee and supposedly installs in a half-hour or so. I wanted to mention this so that you folks with this problem could get this issue and look it over. If I had a scanner, I would have scanned it and entered the data, but........ Enjoy, Cliff

ALPHA XY -> RE: Steering shaft noise FIX. (4/24/2008 5:15:45 PM)
I have the clunk now...really pisses me off actually that GM is so cheap and did not sort this out after the known problem!! ISO "the fix"

tomp -> RE: Steering shaft noise FIX. (4/24/2008 8:01:05 PM)
That article and the Borg part is for an H2 and not an H3

ALPHA XY -> RE: Steering shaft noise FIX. (4/25/2008 6:42:26 AM)
^^^thats what I thought...:(

CWS -> RE: Steering shaft noise FIX. (4/25/2008 7:42:31 AM)
Whoops, I didn't notice that. I have to re-read the article, my bad. Duhh. Cliff

CWS -> RE: Steering shaft noise FIX. (4/25/2008 3:55:45 PM)
Well, I just got home and re-read the article. The article does not specifically address any Hummer by model; it's written as; Chevy/GM/Hummer. So when I read it I thought it was addressing the H3 steering shaft issues that I've read about. Cliff

Page: [1]

Return to Hummer Forums home page or view the Full Version of this page.