Hummer Forums   Hummer Classifieds   Photo Gallery   Member List   Calendars   Search   Forum FAQ   Contact HF   Sponsors
  Hummer Lineup   Hummer News   Hummer Recalls   TSBs   Timeslips   Register   Login

Scott let me drill!!!!!   Printable Version Hummer Forum >> Hummer Forums - General >> Sights N Sounds >> Scott let me drill!!!!! Page: [1] 2 3 4   next >   >> Login Message << Older Topic   Newer Topic >> Scott let me drill!!!!! - 4/13/2008 4:02:45 PM    Muddydawg75 Posts: 9951 Joined: 3/11/2007 From: South Jersey Shore Status: offline Scott asked me to go ahead and share the 3 little lights we added to the back of his Sand Flea today... We decided that the only way it would look good is to get the two H2 lights for the corners... but we added the 3 in the middle. Anybody that has any interst in doing this can get an idea from a couple of the pics on where/spacing. Tip #1:  Holding the lights in place with tape to make the marks is a very wise choice.   The back door is 46 1/8"  We marked the center at 23 1/16 and then measured in from the outsides of the door 12" for the outside of the light... I think it came out great and the wiring was basic 101... FYI the brake light is the blue wire and the tailight is the brown wire. and since we all know.... Finished: and some in progress pics... The first hole!!!!!!!! Still drilling.... One down.... 10" spacing vs 12" spacing....  we went with 12 as I said... taped in place... 2 down.... All done.... < Message edited by Muddydawg75 -- 4/15/2008 4:08:17 PM > _____________________________ Graphics by HUMMER DRIVER "I feel sorry for people who don't drink. When they wake up in the morning, that's as good as they're going to feel all day." --Frank Sinatra Post #: 1 RE: Scott let me drill!!!!! - 4/13/2008 5:11:52 PM    blackstangs281 Posts: 6772 Joined: 11/13/2005 From: Pittsburgh PA Status: offline Looks good. I think it needs 2 on th corners like the H2. _____________________________ (in reply to Muddydawg75) Post #: 2 RE: Scott let me drill!!!!! - 4/13/2008 5:14:18 PM    Muddydawg75 Posts: 9951 Joined: 3/11/2007 From: South Jersey Shore Status: offline yeah.... we have to order the H2 ones... the little ones were just gonna look gay... _____________________________ Graphics by HUMMER DRIVER "I feel sorry for people who don't drink. When they wake up in the morning, that's as good as they're going to feel all day." --Frank Sinatra (in reply to blackstangs281) Post #: 3 RE: Scott let me drill!!!!! - 4/13/2008 5:17:28 PM    Bennersj Posts: 690 Joined: 2/11/2007 From: Bethlehem, PA Status: offline He did an excellent job, they look great and I'm very happy with it.  Took our time to make sure everything was even and we had the spacing we wanted.  I was very nervous, we would be in the middle of a conversation and when I would hear the drill I would just stop not even realizing I was doing it. (in reply to Muddydawg75) Post #: 4 RE: Scott let me drill!!!!! - 4/13/2008 5:18:32 PM    3hummers   Posts: 11687 Joined: 9/23/2007 Status: offline And no tool kit is complete without a couple of beers in it. Looks really good. _____________________________ 2006 H1 Alpha wagon 2000 H1 Slantback 1997 H1 wagon 2008 H3 Alpha (in reply to Muddydawg75) Post #: 5 RE: Scott let me drill!!!!! - 4/13/2008 5:32:05 PM    Bennersj Posts: 690 Joined: 2/11/2007 From: Bethlehem, PA Status: offline They work great for a bubble level!  Or when you finish the make a great magnifying glass! (in reply to 3hummers) Post #: 6 RE: Scott let me drill!!!!! - 4/13/2008 5:38:35 PM    3hummers   Posts: 11687 Joined: 9/23/2007 Status: offline They can also double as sunglasses. _____________________________ 2006 H1 Alpha wagon 2000 H1 Slantback 1997 H1 wagon 2008 H3 Alpha (in reply to Bennersj) Post #: 7 RE: Scott let me drill!!!!! - 4/13/2008 5:54:03 PM    HARDxCOR3 Posts: 138 Joined: 3/24/2008 From: Bergen County, NJ Status: offline good job looks great (in reply to 3hummers) Post #: 8 RE: Scott let me drill!!!!! - 4/13/2008 11:49:53 PM    HummBob Posts: 15682 Joined: 5/6/2006 Status: offline It looks GREAT, if you don't mind them CrOoKeD!!!!! _____________________________ 2004 Black Hummer H2 2007 Black Escalade (in reply to HARDxCOR3) Post #: 9 RE: Scott let me drill!!!!! - 4/14/2008 3:34:16 AM    Muddydawg75 Posts: 9951 Joined: 3/11/2007 From: South Jersey Shore Status: offline Crooked? _____________________________ Graphics by HUMMER DRIVER "I feel sorry for people who don't drink. When they wake up in the morning, that's as good as they're going to feel all day." --Frank Sinatra (in reply to HummBob) Post #: 10 RE: Scott let me drill!!!!! - 4/14/2008 4:07:34 AM    Trey124 Posts: 4577 Joined: 7/20/2006 Status: offline Scott, I told you not to let him have the beer until AFTER the install.  It looks like you got away with it, but that's a rookie mistake.  All joking aside they look really good. _____________________________ Slate Blue H3 Owner, THCI member and Driving Academy Grad. (in reply to Muddydawg75) Post #: 11 RE: Scott let me drill!!!!! - 4/14/2008 5:20:47 AM    HummerGuy Posts: 6650 Status: offline Crooked? Those things are lined up perfectly. Stop smokin' in the back room Bob (in reply to Trey124) Post #: 12 RE: Scott let me drill!!!!! - 4/14/2008 6:09:15 AM    3hummers   Posts: 11687 Joined: 9/23/2007 Status: offline Then what else would he do in the back room...maybe we don't want to know. _____________________________ 2006 H1 Alpha wagon 2000 H1 Slantback 1997 H1 wagon 2008 H3 Alpha (in reply to HummerGuy) Post #: 13 RE: Scott let me drill!!!!! - 4/14/2008 7:08:17 AM    importkiller   Posts: 7253 Status: offline looks good!! I'm thinking about doing this but with strobes instead of marker lights  I haven't looked at it yet...how involved was it to take off the body cladding? the pics Look like two screws and two push in pin things? _____________________________ (in reply to 3hummers) Post #: 14 RE: Scott let me drill!!!!! - 4/14/2008 9:46:29 AM    Bennersj Posts: 690 Joined: 2/11/2007 From: Bethlehem, PA Status: offline It was simple to pull apart.  You only need to pull the lower black half off, the upper half will not give you any extra access. Crooked lights..I don't think so.  Even if so it still beats tarnished bling! (in reply to importkiller) Post #: 15 Login OR Register now to post a reply to this forum topic. Page:   [1] 2 3 4   next >   >>   Hummer >> Hummer Forums - General >> Sights N Sounds Jump to: Select a ForumAll Forums---------------------- [Hummer Forums - General] - - New Member Area - - Off Topic - - - - Sports Discussions - - Sights N Sounds - - General Hummer Talk - - Ride of the Month - - Meets, Events, and Shows [Hummer Lineup] - - Hummer H1 - - Hummer H2 - - Hummer H2 SUT - - Hummer H3 - - - - H3 Frequently Asked Questions - - - - - - Head and Valve Problems. - - Hummer H3T - - Hummer Concepts [Brand Reviews] - - Audio Visual/Interior Modifications - - Detailing - - Drivetrain Area - - - - Intake, Headers and Exhaust - - - - Nitrous, Super Chargers, & Turbos - - - - PCM & Fuel Systems - - - - Suspension - - Tire and Wheel [Sponsoring Vendors & Classifieds] - - AirDocIntakes.com - - Member Group And Special Buys - - PRIVATE For Sale / Trade Classifieds - - Private 'Wanted' Classifieds [Other] - - Hummer Forums Help & Suggestion Center

Today's Posts Most Active Topics Make A Donation Forum Rules & FAQ RSS Feeds Hummer Prices Hummers Hummer H1 Hummer H2 Hummer H3 Featured Sponsors Advertising Info Top 10 Posters hummbob 15682 3hummers 11687 muddydawg75 9951 importkiller 7253 blackstangs2 6772 hummerguy 6650 trey124 4577 rhill20 4547 h34 pleasure 3711 shortbus 3600 New Vendors TSS Radio AMSOIL - Performance Oil Technology G-Style Hummer Accessories K&N Engineering, Inc.

Contact Us | Advertising | Automotive Directory | About Us | Link To Us | Archive | Hummer Links | Legal | Privacy Policy | © Hummer Forums.com