quote:

So here’s my take on the shackle lift and quick disconnects.  I’ve been tracking down and putting together a list of the parts for awhile.  Finally got everything and put it on this afternoon.  Here’s what I used:
Shackles – Warrior YJ rear 1.25” lift, part #WAR123 –   http://www.warriorproducts.com
These are 6" hole-hole, about 2.5" longer than stock.  You can see how much beefier these are than the stockers.  I actually bent one of the stock shackles at some point.  Didn’t even notice until I took them off.



Bar Pin Eliminators – Rocky Road Outfitters - http://www.rocky-road.com/zjbarpin.html
I wanted to match the rear shocks to the front but Bilstein doesn’t make the 5125 with a barpin.  The BPE also moves the mounting point down about 1” to compensate for the shackle lift.

Swaybar Disconnects – JKS Quicker Disconnects, WJ 0” lift front, part #3100 - http://store.jksmfg.com/merchant2/merchant.mvc?Screen=QRDISC&Store_Code=JKS01&Category_Code=Swaybar_Disconnects
You can adjust the length on these and at their shortest are around 1” longer than the OEM endlinks.

Shocks – Bilstein 5125, part #BE56248H5 - http://www.bilstein.com/offroad_5125.php
These have 10” of travel and are valved the same as the Cognito/Bilstein front shocks.