Truck - Part III (Work in Progress)

  Printable Version
Hummer Forums >> Hummer Lineup >> Hummer H3 >> Truck - Part III (Work in Progress) Page: [1] 2 3 4 5   next >   >>
Login
Message << Older Topic   Newer Topic >>
Truck - Part III (Work in Progress) - 1/29/2008 7:14:08 AM   
HummerGuy



Posts: 6678
Status: offline
HummerGuy's photo gallery
Well, it's that time again. 

Now that my interior was practically gutted of all add-on electronics, my exterior stripped of all reasonably-removable chrome accessories (goodbye, Knight Rider lights ) and all cliche dooky-looking decals removed, it's time to build the truck I've always wanted.

I'm doing some side computer business as well, so I will finally be in a position financially and wife-approvally  to mod the rig the way I've always seen it and wanted it.

So far, here's what I have done (not like anybody cares )

- Removed chrome hood panel and replaced with new factory black one
- Removed chrome lower grill insert
- Removed ALL add-on electronics
- Removed ALL pin-striping and decals
- Removed "crap" from storage compartments

Here's what I've added:

- New Horn
- Underbody protection (about time, I know)
- Rebuilt Transfer Case (not on purpose)
- Rear Differential flush and lube change
- Painted my iPass transponder black to match the interior
- Added a nice coat of Armor-All (had to make it look good for the dealer)
- New floor mats
- New replacement factory stereo
- New H3 badges (mirrored) to replace the old factory ones I removed.
- Added Schepel dealer logo and Illiana Hummer Club decal to the tailgate
- Hood bug deflector
- Dark Wood-grain dash kit
- Chrome accented interior pieces
- Re-install and hardwire my GPS
- Re-installed my radar detector, hardwired into the ignition
- Completed KITT lighting and sound effects

I'm taking my time to do this right and find the cheapest and best deals for everything I'm going to do, so it won't be finished for another month or two most likely, but once it's done, you best believe I'm going for that Ride of the Month again

I'd like to put a roof rack on, but then the H3 won't fit into parking garages in the city I use often, so that isn't going to happen most likely.

I don't know how many of these things I'll actually follow through with, but you can bet it's going to look a tad different then it does in the pics

My wife wants the MTs first and foremost, and actually has been asking me to get them since we bought the truck.  Doc would be so proud  

Since she doesn't ever come on the forum, I'm thinking about surprising her with these in the next few weeks.  I just have a hard time putting my old tires to waste.  They have 49k miles on them, but still have at least 40% of their tread left.

That's my story.  Please comment at your leasure.  While I honestly shouldn't care what people say or think about my rig, I respect my fellow forum member's opinions and like the feedback.

I'm still a newbie at this off-roading thing

< Message edited by HummerGuy -- 2/21/2008 5:19:33 AM >
Post #: 1
RE: Truck - Part III (Work in Progress) - 1/29/2008 7:39:46 AM   
Doc Olds


Posts: 3648
Joined: 7/11/2007
From: Boat Town USA (Michigan 48045)
Status: offline
49K and 40% tread left????   WTH?  I've never got passed 55K with any real grip left on truck tires?  I rotate every other oil change, or if the wheather sucks real bad, I might go a little longer in between.  Did you actually do a tread guage on them?  What is the Tire Mfg mileage rating on those things?

Keep driving the street slicks, get tires in the spring?

The rest of your plan is interesting.  You need one more thing, I'll PM you later in the week.

(in reply to HummerGuy)
Post #: 2
RE: Truck - Part III (Work in Progress) - 1/29/2008 8:02:09 AM   
HummerGuy



Posts: 6678
Status: offline
HummerGuy's photo gallery
The past few visits, they have told me they are no need of replacing and in good shape.  Mike has seen them.  Maybe they have 30%, I'm not 100% sure.  It's just an eye-ball estimate, but definitely not any immediate need to replace right now.  I don't like wasting money, but we get REALLY good deals on the MT's through the club.  I'll also PM you that info

I'll be anxiously awaiting your suggestions, excluding magnets and Tornado's of course

Now, I could use a SuperCharger

(in reply to Doc Olds)
Post #: 3
RE: Truck - Part III (Work in Progress) - 1/29/2008 8:23:23 AM   
importkiller

 

Posts: 7254
Status: offline
importkiller's photo gallery
sell it and buy the new scion lunchbox...we all know your a scion lover at heart

_____________________________


(in reply to HummerGuy)
Post #: 4
RE: Truck - Part III (Work in Progress) - 1/29/2008 11:33:07 AM   
HummerGuy



Posts: 6678
Status: offline
HummerGuy's photo gallery
What little originality they had was destroyed with the new generation.  They look like like smoothed-out sardine boxes.  At least the last shoebox has some space.

We'll see what revision 3 of my H3 turns out like

(in reply to importkiller)
Post #: 5
RE: Truck - Part III (Work in Progress) - 1/29/2008 11:37:23 AM   
alrock


Posts: 1058
Joined: 5/12/2007
From: Scottsdale, AZ
Status: offline
alrock's photo gallery
looking forward to the changes. Get the MTs and sell the old ones on Craigslist. There's always a buyer.

_____________________________



(in reply to HummerGuy)
Post #: 6
RE: Truck - Part III (Work in Progress) - 1/29/2008 11:40:02 AM   
3hummers

 

Posts: 11783
Joined: 9/23/2007
Status: offline
The last 30% of the tire tread always seem to go alot faster than the first 30% did. I think you will need tires sooner than you think. You are going from one extreme to the other. It will be interesting to see what your truck looks like when you are finished with it...again. Looking forward to it.

_____________________________

2006 H1 Alpha wagon
2000 H1 Slantback
1997 H1 wagon
2008 H3 Alpha

(in reply to HummerGuy)
Post #: 7
RE: Truck - Part III (Work in Progress) - 1/29/2008 11:46:15 AM   
shortbus

 

Posts: 3602
Joined: 6/27/2005
Status: offline
shortbus's photo gallery
get the tires now, that way nobody will have to move rocks for you anymore . . . . .

(in reply to HummerGuy)
Post #: 8
RE: Truck - Part III (Work in Progress) - 1/29/2008 11:56:39 AM   
HummerGuy



Posts: 6678
Status: offline
HummerGuy's photo gallery
Good Point 3hummers.  I didn't think about that.  What is the treadwear like on the MTs on average?  Is it at least in the upper 300s?

Hey, I haven't gotten stuck yet....

well, except for that large hunk of concrete that somehow ended up in the riverbend that everybody was yelling at me to avoid but mistook that for some kind of congradulatory "You did it!"

(in reply to shortbus)
Post #: 9
RE: Truck - Part III (Work in Progress) - 1/29/2008 2:38:22 PM   
HummBob



Posts: 15950
Joined: 5/6/2006
Status: online
HummBob's photo gallery
pics...pics....pics

_____________________________

2004 Black Hummer H2


2007 Black Escalade



(in reply to HummerGuy)
Post #: 10
RE: Truck - Part III (Work in Progress) - 1/29/2008 4:55:00 PM   
HummerGuy



Posts: 6678
Status: offline
HummerGuy's photo gallery
That's going to be a while Bob

(in reply to HummBob)
Post #: 11
RE: Truck - Part III (Work in Progress) - 1/29/2008 5:26:38 PM   
HummerMike


Posts: 376
Joined: 8/8/2006
From: Crown Point, IN
Status: offline
Good choices mike!

I have to say, Mike's truck looks really good and is starting to transform nicely. His tires have a lot of life left in them! About 2 months ago, I checked in an H3 with 83K on it. It had the stock goodyears and they STILL had a little life left in them. I'm assuming those have a hard tread compound. The only thing I've seen go wrong is they chop/feather really bad if you don't rotate them every 7k.

_____________________________

'08 H3 ALPHA w/Adventure Package. Graphite Metallic, Mickey Thompson Baja MTZ's, Rocker Panel & Driveline Protection, Winch, more to come...

www.illianahummerclub.com

(in reply to HummerGuy)
Post #: 12
RE: Truck - Part III (Work in Progress) - 1/29/2008 9:10:06 PM   
HummerGuy



Posts: 6678
Status: offline
HummerGuy's photo gallery
Thanks! Maybe I'll wait to get the new tires then.  I can use that money for other things.

I would like to TRY to at least get the chrome borders off that I have around the door handles, but they don't seem like they will budge.  Can I just use any fishing line? I've never done that before.

(in reply to HummerMike)
Post #: 13
RE: Truck - Part III (Work in Progress) - 1/30/2008 1:37:43 AM   
SamHouseIII


Posts: 152
Joined: 9/25/2007
Status: offline
We need PICS!!

Sam

(in reply to HummerGuy)
Post #: 14
RE: Truck - Part III (Work in Progress) - 1/30/2008 5:22:41 AM   
Trey124



Posts: 4612
Joined: 7/20/2006
Status: offline
Trey124's photo gallery
Sounds like your going to busy for awhile, post pics when you can.

_____________________________

Slate Blue ''07 H3 Owner, THCI member and Driving Academy Graduate For Off Road Use Only & ''08 Boulder Gray Metallic H3 Alpha for the street

(in reply to SamHouseIII)
Post #: 15
Login OR Register now to post a reply to this forum topic.
Page:   [1] 2 3 4 5   next >   >>

 
Hummer >> Hummer Lineup >> Hummer H3
Jump to:




Featured Sponsors
Advertising Info

Top 10 Posters
hummbob15950
3hummers11783
muddydawg759955
importkiller7254
blackstangs26813
hummerguy6678
trey1244612
rhill204549
h34 pleasure3735
doc olds3648

New Vendors
Sewell Parts Online
AMSOIL - Performance Oil Technology
G-Style Hummer Accessories

Hummer Forums .com is not affiliated with or endorsed by General Motors Corporation.