PRIVATE For Sale / Trade Classifieds Sell/Trade your stuff for free! NO COMMERCIAL POSTS!

shop manual for 2007 H2

Thread Tools
 
Search this Thread
 
  #1  
Old 11-08-2010, 12:17 AM
ryan's Avatar
Junior Member
Thread Starter
Join Date: Nov 2010
Posts: 9
Default shop manual for 2007 H2

Anyone know were I could get a manual for an 07 H2? Apparantly I have been told that there is no aftermarket manual for this vehicle. I really need an electrical diagram to try to figure out why I have no power seat heaters or drivers seat movement ability. If someone has one maybe we can pdf a few pages?

Thanx
ryan
 
  #2  
Old 11-08-2010, 03:36 PM
bosch's Avatar
Senior Member
Join Date: Apr 2010
Posts: 190
Default help

will try to help you , first did you check your drivers side seat controler it should be under your seat , it will control your heats and seats,
check for power to unit , mike
 
  #3  
Old 11-08-2010, 03:55 PM
bosch's Avatar
Senior Member
Join Date: Apr 2010
Posts: 190
Default

check under the hood for a fuse or relay for the drivers side
control modual the seat heat will not work unless the engine is running .
i can get you a connector diagram but from what i see, is the power comes from the fuse block under the hood to the control modual so if there is no problem with the fuses or relay you might have a bad control modual ,, dealer would have to check that out but the relay could be swaped out with another one in the fuse center just to check it ..
mike
 
  #4  
Old 11-23-2010, 07:39 AM
DaBeerTender's Avatar
Junior Member
Join Date: Jun 2007
Posts: 2
Default Shop Manual

I was looking on eBay and found a few different ones, but didn't buy one yet. Would the wiring diagram be in one of those manuals or are they not worth the money?
 
  #5  
Old 11-23-2010, 03:00 PM
Easy Ed's Avatar
Member
Join Date: Aug 2010
Location: Mansfield, Ohio
Posts: 49
Default

Helm, got the two book set for my 2003. Not cheap, $135.00...."Contains Factory Authorized Service information written by General Motors"

Link is for the 2007 model year.

http://www.helminc.com/helm/product2...07N&itemtype=N


 
  #6  
Old 11-24-2010, 09:36 AM
jrs2005's Avatar
Junior Member
Join Date: Sep 2007
Posts: 9
Default

Helms is the best out there that I've seen. Only issue is you really need the GM scan tool to do alot of the work.
 
  #7  
Old 11-24-2010, 02:21 PM
Easy Ed's Avatar
Member
Join Date: Aug 2010
Location: Mansfield, Ohio
Posts: 49
Default

Agree about the scan tool, sure would be handy to have.

Originally Posted by jrs2005
Helms is the best out there that I've seen. Only issue is you really need the GM scan tool to do alot of the work.
 
  #8  
Old 12-24-2010, 03:26 AM
Rusty_03's Avatar
Senior Member
Join Date: Mar 2008
Location:
Posts: 124
Default

X2 on Helm and scanner!
MikeH
 
  #9  
Old 12-30-2010, 02:23 AM
ryan's Avatar
Junior Member
Thread Starter
Join Date: Nov 2010
Posts: 9
Default

quick update. Brought the H2 into the shop and it turns out that pin connector to the controller under the seat had loose pin tension. They say they tightened up the tension and it seems to be working great now. crazy.
 
  #10  
Old 09-14-2013, 12:55 PM
philltickle's Avatar
Junior Member
Join Date: Sep 2013
Posts: 1
Default

Have put a duramax into H2 2003,anyone got a wiring diagram for transfer case and the gauges please. Runs and drive's great, but half the gauges don't work HELP
 


Quick Reply: shop manual for 2007 H2



All times are GMT -5. The time now is 06:20 AM.