Brodie
2/18/2008 3:31:34 PM
I have for sale a Volant CAI off of my 2007 H3.
Part number 15636 is for 2007-2008 model 3.7L's as their were minor changes from the 06 design of the intake. It's been on the truck for less than 2500 miles and still looks clean and brand new. Looking to get $200 shipped as this CAI sells for $255+ online and may include added shipping cost. Paypal accepted! Thanks
JeepeaterH3
2/18/2008 7:52:28 PM
where does the volant pull air from? same as stock in fender? i may be interested in this too
Brodie
2/18/2008 8:16:58 PM
It pulls air from the inner fenderwell and also at the bottom of the intake. The intake has a 2" snorkel pulling air from the mid radiator area.
JeepeaterH3
2/19/2008 5:06:35 AM
OOO. WELL THAT WONT WORK. IM IN THE MUD TOO OFTEN.
IM TRYING TO FIND AN INTAKE LIKE THIS, WITHOUT SO MANY OPENINGS.
THANKS ANYWAY!
Brodie
2/19/2008 5:18:13 AM
That's ok! The True Flow intake maybe your best bet.
H3_seabee
3/3/2008 3:15:56 PM
Would this fit on an 06 h3 ?
Brodie
3/3/2008 4:32:06 PM
As far as I know it will only work on the 3.7L. They made changes to the location of the MAF sensor on this engine model.
motley1987
5/13/2008 2:12:41 PM
Is this CAI still for sale? Do you include the piece for the MAF sensor? I have an 08 H3 and since they changed the location of the MAF sensor (it's attached to the box itself instead of attached to the line that leaves the box and goes to the engine), I'm having a hard time finding the right adaptors to get another intake I bought to work. It looks like your intake had the MAF sensor relocated and also had the connector for the vacuum line connected to the box so it looks like it would work.
Doc Olds
5/23/2008 12:15:11 PM
Looks like and does are two different things?
The subject kit is for 2006 and 2007 models.
http://www.volant.com/idetail.asp?ID=494 The 2008 location is not a significant change, but it is a different MAF, The 07 lists at $92.50.....08 lists at $104.00? Good luck.
veves
5/23/2008 9:31:11 PM
so will the 07 volant work with the 08 ?
Brodie
5/23/2008 10:19:00 PM
No, the 15636 intake is only for the 07.
Brodie
5/23/2008 10:19:58 PM
quote:
ORIGINAL: Doc Olds
Looks like and does are two different things?
The subject kit is for 2006 and 2007 models. http://www.volant.com/idetail.asp?ID=494
The 2008 location is not a significant change, but it is a different MAF, The 07 lists at $92.50.....08 lists at $104.00? Good luck.
Doc, Motley didn't buy it!
Doc Olds
5/24/2008 5:56:28 AM
quote:
ORIGINAL: Brodie
quote:
ORIGINAL: Doc Olds
Looks like and does are two different things?
The subject kit is for 2006 and 2007 models. http://www.volant.com/idetail.asp?ID=494
The 2008 location is not a significant change, but it is a different MAF, The 07 lists at $92.50.....08 lists at $104.00? Good luck.
Doc, Motley didn't buy it!
Whew, I was hoping not.
It is a different MAFfor the 2008......but if it fits thru the hole, and mounts with a gool seal to the tube, it could work for an 08.
Although the MAFs are different, they are very similar in their mounting surface seal???
Somebody should experiment with that.
Brodie
5/24/2008 8:38:10 AM
TTT, still for sale! Thanks All
