Turbonetics Sale & NOW 3yr/36k Powertrain Warranty - Page 2

Thanks for your deposits...

Jesse

Have a Great Weekend!

Jesse

What is the fuel mileage with the turbo attached under normal driving conditions?

any dyno results?  Also interested in PCM changes ? Will it help to have the pcm reprogramed ?PCM for less?

quote:

ORIGINAL: RutDogg

What is the fuel mileage with the turbo attached under normal driving conditions?

don't quote me, but the turbo shouldn't affect gas milage much if any under normal driving conditions (if you're not going into boost, it won't take any extra fuel to keep the same air/fuel ratio the same, in theory..)

Do you have to re-tune the H-3's computer?

According to this it comes with an up-grade program with up loader
 
Turbonetics Hummer H3 Turbo Kits Include:
- Turbonetics 60-1 Stage V Turbocharger
- Turbonetics Evolution Wastegate
- Turbonetics Raptor Blow Off Valve
- Spearco Front Mount Intercooler
- (5) High Flow Injectors
- HP Tuners Tuned Software & Uploader
- SS304 Mandrel Bent Polished Exhaust Piping
- Aluminum Black Chrome Charge Piping
- AEM Dryflow Airfilter
- All V-Band Clamps & T-Bolt Clamps
- All Necessary Installation Hardware
- (1) Case Turbonetics TS-1 Synthetic Oil

Stock Power: 225 HP
Turbo Kit Power: 350 HP
Boost Level: 8 PSI

One of the benefits of a Turbo over a SuperCharger is that a turbo can be driven out of boost and it does not create a parasitic drag on the engine. Therefore, out of boost, the H3s should get MPG the same as stock. Under certain cicumstances you will see better gas mileage as you now have the power to tow, go up steep hills, etc without having to really push the engine into the higher RPMs.

quote:

ORIGINAL: RutDogg
What is the fuel mileage with the turbo attached under normal driving conditions?

Thanks, you are correct!

quote:

ORIGINAL: CerberusSVT

quote:

ORIGINAL: RutDogg
What is the fuel mileage with the turbo attached under normal driving conditions?

don't quote me, but the turbo shouldn't affect gas milage much if any under normal driving conditions (if you're not going into boost, it won't take any extra fuel to keep the same air/fuel ratio the same, in theory..)

The nice thing about buying a Turbonetics turbo kit is that they only sell 100% complete kits. All turbo components, all installation components and full fuel management that is Plug n Play!

quote:

ORIGINAL: patshemi
any dyno results?  Also interested in PCM changes ? Will it help to have the pcm reprogramed ?PCM for less?

See Below

quote:

ORIGINAL: chewbarka
Do you have to re-tune the H-3's computer?

 
 
Thanks Dennis!

quote:

ORIGINAL: Dennis
According to this it comes with an up-grade program with up loader
Turbonetics Hummer H3 Turbo Kits Include:
- Turbonetics 60-1 Stage V Turbocharger
- Turbonetics Evolution Wastegate
- Turbonetics Raptor Blow Off Valve
- Spearco Front Mount Intercooler
- (5) High Flow Injectors
- HP Tuners Tuned Software & Uploader
- SS304 Mandrel Bent Polished Exhaust Piping
- Aluminum Black Chrome Charge Piping
- AEM Dryflow Airfilter
- All V-Band Clamps & T-Bolt Clamps
- All Necessary Installation Hardware
- (1) Case Turbonetics TS-1 Synthetic Oil
Stock Power: 225 HP
Turbo Kit Power: 350 HP
Boost Level: 8 PSI

Have a Merry Christmas, Happy Holidays and Safe New Year Everyone!
 
Jesse

quote:

ORIGINAL: TurboKits.com
Also, Spearco tests all of their intercoolers underwater for leaks, so a properly installed intercooler with properly torque'd t-bolt clamps can be completely submerged and run without leaks. If anything the water will help cool the charge and make a few extra HP

Ummm..  Yeah..  I need 350hp of water fording ability...   Heck with that kind power it's not called fording..  It's called skipping...    Of course the intercooler isn't in the water at the point..  Soo...

Yeah Jesse..  There's one heckler in every group..  And today it's me..

Seems like it's good kit and deal for those that need it..

Thanks
 
Merry Christmas! (Yeah I said it)
 
Jesse
 

quote:

ORIGINAL: Crash

quote:

ORIGINAL: TurboKits.com
Also, Spearco tests all of their intercoolers underwater for leaks, so a properly installed intercooler with properly torque'd t-bolt clamps can be completely submerged and run without leaks. If anything the water will help cool the charge and make a few extra HP

Ummm..  Yeah..  I need 350hp of water fording ability...   Heck with that kind power it's not called fording..  It's called skipping...    Of course the intercooler isn't in the water at the point..  Soo...

Yeah Jesse..  There's one heckler in every group..  And today it's me..

Seems like it's good kit and deal for those that need it..

What will adding this do to the Factory Warranty?  I have heard GM would need to do testing to approve keeping the factory warranty.
 
Also what type of Octane gas will be needed?
 

Wholly crap, I have to visit this place more often. I made a comment on one of my forums that I could use more horses under the hood and BAM - HERE IT IS!! Now this is definitely something I would want in my H3.

I am 99% sure that a dealer can't void a warranty based on any aftermarket part. They do however, have the right to charge you to fix problems that they prove are caused by the part.
 
If you add a turbo and your tranny breaks, they can probably prove it was the turbo's fault. However, if your stereo stops working, they would have a hard time linking the 2...
 
Hope this made sense...
 

quote:

ORIGINAL: ZOO
What will adding this do to the Factory Warranty?  I have heard GM would need to do testing to approve keeping the factory warranty.
Also what type of Octane gas will be needed?

 

Heck yeah! Get in quick, we have only four of these kit slated for TurboKits.com customers... SO if you are interested a $500 deposit will hold one under your name!
 

quote:

ORIGINAL: inked
Wholly crap, I have to visit this place more often. I made a comment on one of my forums that I could use more horses under the hood and BAM - HERE IT IS!! Now this is definitely something I would want in my H3.

 
Thanks
 
Jesse

Are there any dealers on the board that can confirm this?

Jesse

Happy New Year!
 
Jesse

The Magnuson Moss act will confirm it.

Thanks...
 
Jesse
 

quote:

ORIGINAL: Dennis

The Magnuson Moss act will confirm it.

1 More Order in... Thanks!

We still have 1 left from the initial 4 we are getting. The 1st $500 deposit get's it.

Also, let me know if there are any further questions...

Thanks

Jesse

Update: I just talked to Turbonetics, the first kits will start shipping Feb 2nd... Get those orders in now to make sure you get one of the first kits.
 
Jesse

Will this work with a new 07 H3? Or is the engine too different? If it will work what HP gain are you looking at? Still just 350 or a bit higher?
 
Thanks!

Hello Wu Jen,
 
The kit has not been tested on the 07.. If the kit fit, the larger displacement will change the tune. Custom DYNO tuning would be required.
 
Sorry I couldn't give any difinitive answers. My hands are tied unless it's been tested and approved my the manufacturer...
 
Thanks
 
Jesse

Hello All, Great NEWS!
 
We just received our shipment of H3 turbo kits in today... We have them in stock, same day shipping...
 
Call 860-676-2929 to order.
 
Thanks
 
Jesse

Ok who has received the kit?? I want one bad but want to wait and see if there are any new kit fitment problems or tuning issues. Jesse is it possible to get a copy of the install instructions??

Hey jn1300r,
 
I wouldn't worry about "new kit" fitment issues. Turbonetics does top quality R & D and wouldn't be selling a kit if they hadn't tested it and re tested it, etc. For arguments sake, let's say they do find a problem with fitment, they normally retrofit all kits sold free of charge. They had 1 piping change on the 350z and G35 kits and sent out $600 of new piping to all customers free of charge :)
 
Yeah, PM me and I'll send you a link or a copy... Turbonetics doesn't have them online yet, but I have a copy.

Jesse

quote:

ORIGINAL: jn1300r

Ok who has received the kit?? I want one bad but want to wait and see if there are any new kit fitment problems or tuning issues. Jesse is it possible to get a copy of the install instructions??

I think the question everybody wants to know the answer to is:
 
"Will it work with my magnets?"