[ View Full Version Of This Page ]

New Owner - 2002 H1 - Looking for recommendations for upgrades

All Forums » Hummer H1 » New Owner - 2002 H1 - Looking for recommendations for upgrades

yellow7
4/7/2008 7:40:25 AM
I just purchased a 2002 H1 open top with 9000 miles on it. Looking for recommendations for possible upgrades (programmer, exhaust, ect). Also, are there any aftermarket wheels that will allow me to keep the CTIS ? I'm looking for black wheels. Thanks for any replies.
3hummers
4/7/2008 10:39:01 AM
There are some aftermarket wheels that support the CTIS system. Not sure about black but there are aftermarket wheels that do work with CTIS. I have never looked into them but some of the dealers like Cerritos Hummer, in Cerritos CA., used to sell a bunch of them. I know used dealers like DC Motors put a lot on their reasle trucks. I have never looked into them so I don't know brands, etc. I have looked into some of the chip/flash performance upgrades and probably the best H1 mechanic in the country recommended against them. This guy is big into performance H1s so I have not done that either. There are probably some guys on here that have that can chime in. RapTorq, Predator and possibly PCM4Less could probably help you.
beezer
4/7/2008 1:19:24 PM
Congrats on your purchase. I'm looking to purchase an H1 as well.
Looking forward to upgrades you aquire.
xzachx2112
4/19/2008 7:42:33 PM
what about a set of alpha wheels?
3hummers
4/19/2008 9:26:23 PM
Yellow hasn't ever come back.
yellow7
5/8/2008 12:41:14 PM
Do you have a set of the 2006 H1 wheels ?

Sorry for my delay, I thought I had the email notifications setup.

J
3hummers
5/8/2008 10:07:43 PM
I have a spare set of the Hutchinson 2 piece wheels like the Alpha wheels except they are all polished ( 2004 ) I use them as spares and may put them on the 97.
yellow7
5/9/2008 6:58:33 AM
Those are basically what I want but the dark grey version/black. I guess I'll keep hunting.
3hummers
5/9/2008 8:46:42 AM
If you find the polished 2004 Hutchinson wheels the only difference is the powdercoating in the center of the wheel. If it says Alpha you will pay more. You might be able to find the polished wheels and have them powdercoated for far cheaper than a set of Alpha wheels. The list for over $2,100.00 each without the CTIS line or center cap. I got mine for $2,300.00 for a set of four including the CTIS, center cap, GSA tires with 30% tread left and shipping. Keep looking and the deal you want will happen. Just be patient. I am still looking for a spare set of the Alpha wheels. The last few sets I have seen sell have been in the $4,500.00 range.
ronb
5/9/2008 9:18:05 AM
Travis now sells them:
http://www.rubberduck4x4.com/h1/wheels/17inchtwopiecealloy/

I think Blair Outland has them too, a bit cheaper:
http://www.usedh1.com/live/template.php?page=item_detail&forsaleid=235

I don't know where Blair gets his but me thinks Travis gets them direct from Hutchinson (I bet they shat a runflat when they found out what dealers were charging for their rims). You can also powder-coat the ones you have. If you just want the beadlock for wheeling, you can save a ton of $$ and get the steel military ones for under $1k a set of 5. If you just like the look, maybe stick with the one-piece alloys so any tire shop can deal with them.

rb
3hummers
5/9/2008 9:48:40 AM
Blair has not responded to any of my e-mails on his wheels so I think he must not have any at the moment. Travis has some but wanted about $1000.00 each at the time. He also had some with some different machining on them.
hummech
5/9/2008 10:19:05 AM
i have a customer that is getting rid of his alpha rims for some cepeck rims and tires. he was asking $3500.00 for a set of 4.
  if you install aftermarket wheels make sure that they have the correct factory off-set. if it doesn't you will brake off the spindle nut or crack the spindle itself and the wheel will pass you on the freeway as you slide to a stop.
3hummers
5/9/2008 2:02:26 PM
I'll take them if they are in decent shape
hummech
5/9/2008 3:11:23 PM
no problem dave. this vehicle is a pavment princess and has never seen off-road. he is getting some cepeck wheels for his vehicle so when those come in i am sure that you can have them. call me on my cell phone and i can get your phone number to give to him,
mine is 714-465-8079.
 thanks,
   mike s.
3hummers
5/9/2008 3:16:50 PM
done
xzachx2112
5/9/2008 5:19:01 PM
congrats, looks like you finally found those rims you were looking for
3hummers
5/9/2008 8:08:54 PM
I've been trying for awhile.
xzachx2112
5/9/2008 8:25:36 PM
Yep!
3hummers
5/9/2008 8:58:02 PM
Just have to be patient
xzachx2112
5/9/2008 9:12:54 PM
so does that mean the 04 set will go on your 97?
3hummers
5/9/2008 9:23:45 PM
Not sure.The 97 has the one piece aluminum wheel with GSAs. Good street tire but not so good off road. The polished Hutchinson's have GSA's on them. This new set has GSAs on them. I am going to have a more aggressive set of tires mounted on one of them and use the others as spares. I was originallt thinking I would use the polished set as an offroad set but don't think I want to be changing back and forth all the time.
Related Threads

[ View Full Version Of This Page ]

Return to the Hummer Forums home page - Archive Home