redprowler
1/10/2008 5:51:50 PM
when my nav screen is on and in 3D mode,i get a blue bar across the screen about 3/4 inch wide and 1/2 inch from the top,everything is ok in normal screen mode,just occurs in 3D.took a look at someone elses nav unit and it showed the same thing,so dont know if this is normal or not,could use some feedback from others please,if you have this on your screens or not.thanks steve
BassGear
1/10/2008 5:55:46 PM
Hmmm...I got a factory Nav...
I'd help ya if I could...I don't even know what 3D mode is
HummBob
1/10/2008 8:14:28 PM
Yeah, I have no idea what 3D Mode is??
redprowler
1/11/2008 2:42:17 PM
when you go to the screen,press nav,up comes the screen options and one of them is 3d,instead of areial view it will come up as if you are lookig in front of you,eyeline.hope this helps.
HummBob
1/11/2008 8:22:58 PM
I'm assuming it's the HORIZON LINE???
I can't check cause the OEM Nav was in the traded Escalade!!!
BassGear
1/13/2008 5:51:02 PM
quote:
ORIGINAL: redprowler
when my nav screen is on and in 3D mode,i get a blue bar across the screen about 3/4 inch wide and 1/2 inch from the top,everything is ok in normal screen mode,just occurs in 3D.took a look at someone elses nav unit and it showed the same thing,so dont know if this is normal or not,could use some feedback from others please,if you have this on your screens or not.thanks steve
Hey Red, I checked out my Factory Nav and it does NOT show a blue bar in 3D. It shows as clean as it would in the normal mode. Maybe it's not the Nav but the nav disk? I have Version 1.0, it was released around 3 months or so.
