YeeHaw
10/10/2007 6:35:18 AM
I was just curious if it’s a DIY project.
parts guy
10/10/2007 8:59:03 AM
20 minutes.
1.Yank out the lower grille(black plastic mesh )
2.Trim the side's of the mesh so the bracket from the guard (roto zip works best)
3.pending on if you got a wrap(double bar) or a single bar
weather you have to use spacers or just bolt straight to the frame.
Need real instruction's let me know.
Jeff
beachman
10/10/2007 11:29:27 AM
I am the furthest thing from a "wrenchhead" and mine was done in 20 min...
Muddydawg75
10/10/2007 4:30:41 PM
I posted some pics for another guy.... let me know.... my only real advice is DO NOT take both sets of bolts out of the hood hinges at the same time.....
YeeHaw
10/11/2007 8:48:16 AM
Thanks everyone! That’s a big help, everyone I had asked so far, had the dealer install it.
hilljob26
10/11/2007 10:49:25 AM
almost anything that is a bolt on is pretty much a diy,especially exterior
GorillaH2
10/11/2007 1:10:51 PM
Try installing a "bolt-on" turbocharger to a camaro....that isnt for a diy
Muddydawg75
10/11/2007 4:27:33 PM
quote:
ORIGINAL: GorillaH2
Try installing a "bolt-on" turbocharger to a camaro....that isnt for a diy
I did an ATI D1SC on a LT1..... was pretty easy.... headers now.... that sucked.... I'd take the motor out next time....
