22'S WITH 325/50 TERRA GRAPPLERS. WILL THEY FIT? HOPE SO! PICS INSIDE

I knew they would be bigger....but WHOA!  Hope these fit.  Anyone want to take bets on if I'll have to sell them on ebay or buy a different set of tires?
I bought all 5....so I guess I'll dress warm (it's about 6 degrees here in Indiana) and start off trying on the spare....see if it fits.
More pics to come later tonight.

 

 

Where did you get them? And how much? It's a cold one today! Was -13 this A.M. when I got up without the windchill!!!! Nice looking wheels!!!

Bigwheels.net is where I got them.  Called and spoke with Bill.  Got a much better deal than I could find anywhere else by over $500.00....and I shopped around for several weeks locally and online for these Driv Wheels.  If you're interested in a set, give them a call, I'm sure Bill will work with you like he did me.

What's the diameter..??   I think 35" and maybe some change is gonna be the max.. 

WOW!!!!! They look AWESOME!!! Can't wait to see the installed pics!!!!!

Thanks HummBob.  Any compliment coming from the BLING MASTER is much appreciated! 
.....and to Crash, yes, they are 35" tall.  They were marked with the factory stickers showing the metric 325/50 and the 35" sizing.

Looks good wolf...........put'em on and take pic's........

quote:

ORIGINAL: blackstangs281

Looks good wolf...........put'em on and take pic's........

 
I would love to!  BUT....that wonderful company called UPS decided to split up my wheels on two separate trucks.  The guy that delivered 3 wheels this morning said I should get the last wheel later today from another driver.  Well guess what?  It's almost 7:30pm and "that other driver" never showed up.  Can't really mount up just 3 wheels :(
 
UPS BLOWS!

If you turn T-bar 2 to 3 times, 325/50 Terra Grapplers can be fit. But, the tire hits to a sway bar at full-lock.
I have the same tires on my H3 with 22" KMC Backseat +12mm.

Those flares look good man. Is it molded into the back bumper or a single piece?

I like those wheels!

It's a single piece.
 

They should fit without to much problem depending on the offset and backspacing. It's funny when you first see them up against your stock wheels like that. The first thing you think is that there is no way those huge tires are going to fit. Then once they are mounted you think " man those wheel and tires make this truck look bad-ass!". I mounted 35" Nitto Mud Grapplers on 18" rims on mine with only slight rubbing on the outside of the bumper at full lock. You will have to crank your T-bars some. I went 3.5 turns on the passanger side and almost a complete 4 turns on the driver side. As I recall I ended up with 27 3/4" from center of the front axle to inside lip of fender well. Where in the rear the stock height was 28 1/2" from center of rear axle to inside of fender lip. Now don't quote me on those exact heights, as I dont have those number in front of me at the moment, but I do know that there is for sure a difference of 3/4" between the height of the front and rear. To the eye the truck look level front to rear.
  As for the spare, it will fit with no problem.

quote:

ORIGINAL: Voodoo

I mounted 35" Nitto Mud Grapplers on 18" rims on mine with only slight rubbing on the outside of the bumper at full lock. As for the spare, it will fit with no problem.

 
I sure hope they fit.  I'd hate to have to buy a new set of tires and try to sell these off at a discount on ebay.
What was your offset on your 18" wheels.  I'm a little worried about that.  The guy above with the pics (black H3) showing the same sized tires had about 1" less backspacing and he was rubbing.  I went with what Driv wheels said would fit (and the only wheel they made with the right centerbore) but it has a +35 offset....which puts my wheels inward / towards rubbing the suspension components by about an inch more than his.
 
As soon as UPS brings my "missing wheel" I'll have the lugs necessary to mount them up and find out.  Again, let me know what your offset was on those 18" wheels.

My offset is +12 and backspacing is 5" on Helo Maxx 6 rims. The guy at the tire store tried to tell me I needed a -12 offset, but I informed him he was wrong. If I'm not mistaken this is the same set-up that Importkiller runs but his are 17" rims. BTW, I owe most of my wheel/tire knowledge to Importkiller. He really helped me out.

If they rub too much, you could always try these.

quote:

ORIGINAL: BB

It's a single piece.

 
I like the looks of that.

UPDATE:
 
Sorry for the delay....I know many of you thought you would see some mounted up pics by now.  However, UPS still has my last wheel with the lugs packed inside!  First it was on the wrong truck, now it's delayed because of all the snow we got yesterday.  Oh well, maybe by the end of the day today I'll have some new pics to post up.

I love those nitto grapplers , the mud ones are mean looking.....I like that look...I hope your wheels and tires will fit for you , they will look awsome on your truck
         gangstagirl 

jagetemonyet, jagetremonyet, huh,huh????

too big of rims for the H3 in my opinion

I WANT TO SEE NOOWWWWWWWW lol
 
Dude those are some of the sickest rims I have seen yet.  You may have HummBob beat with those bad boys.
 
Did you crank your torsion bars? You probably will need to!

quote:

ORIGINAL: branstone

too big of rims for the H3 in my opinion

 
   .........and are my 35" tires too big too?

Well, did big brown ever show up with your last wheel?

big tires are great i like big thick rubber, just think the 20" 22" rims dont look right on the H3
 
i am going to get 33"s  but keeping the same rim size