noclrnce
2/3/2008 10:26:06 AM
I had a goal to run my power wire so I could get my install going. To make a long story short, I couldnt find a place to run it from under the hood to inside the cab. Where does everyone else run theirs?
Muddydawg75
2/3/2008 1:11:19 PM
You will probably have to drill a new hole in the firewall to run cable that big.... and use a weatherproof grommet.
Two places you could consider running would be along the tunnel...
OR...
if you have removed the door sills there is a pretty deep valley in there.
IMHO...
sattv
2/8/2008 2:24:16 PM
mine runs along the frame and up in back in an H3
06h3humv
7/17/2008 7:06:55 PM
I RAN MINE THRU THE MAIN HARNESS GROMET THEN DOWN BEHIND THE E-BRAKE BEHIND THE TRIM PANELS AND THEN UP THE LIL HUMP TO THE LEFT REAR WHEEL WELL COVER .I THEN PUT IN A DISTRIBUTION BLOCK . I HAVENT HAD TIME TO FINISH THE INSTALL BECAUSE OF WORK. ALSO I CANT FIND A PLACE TO MOUNT THE CAP AND AMPS. ANYONE GOT ANY IDEAS PLEASE FEEL FREE TO LEAVE A POST OR EMAIL ME At
JOEYTHEROTOR@hotmail.com
